xsm is a session manager. A session is a group of applications, each
of which has a particular state. xsm allows you to create arbitrary
sessions - for example, you might have a "light" session, a "development"
session, or an "xterminal" session. Each session can have its own set of
applications. Within a session, you can perform a "checkpoint" to save
application state, or a "shutdown" to save state and exit the session. When
you log back in to the system, you can load a specific session, and you can
delete sessions you no longer want to keep.
Some session managers simply allow you to manually specify a list of
applications to be started in a session. xsm is more powerful
because it lets you run applications and have them automatically become
part of the session. On a simple level, xsm is useful because it
gives you this ability to easily define which applications are in a session.
The true power of xsm, however, can be taken advantage of when more
and more applications learn to save and restore their state.
OPTIONS
-display display
Causes xsm to connect to the specified X display.
-session sessionName
Causes xsm to load the specified session, bypassing the session menu.
-verbose
Turns on debugging information.
SETUP
.xsession file
Using xsm requires a change to your .xsession file:
The last program executed by your .xsession file should
be xsm. With this configuration, when the user chooses to shut
down the session using xsm, the session will truly be over.
Since the goal of the session manager is to restart clients when
logging into a session, your .xsession file, in general, should not directly
start up applications. Rather, the applications should be started within
a session. When xsm shuts down the session, xsm will know to
restart these applications. Note however that there are some types of
applications that are not "session aware". xsm allows you to
manually add these applications to your session (see the section titled
Client List).
SM_SAVE_DIR environment variable
If the SM_SAVE_DIR environment variable is defined, xsm will
save all configuration files in this directory. Otherwise, they will be
stored in the user's home directory. Session aware applications are also
encouraged to save their checkpoint files in the SM_SAVE_DIR directory,
although the user should not depend on this convention.
Default Startup Applications
The first time xsm is started, it will need to locate a list of
applications to start up. For example, this list might include a window
manager, a session management proxy, and an xterm. xsm will first
look for the file .xsmstartup in the user's home directory. If that
file does not exists, it will look for the system.xsm file that was
set up at installation time. Note that xsm provides a "fail safe"
option when the user chooses a session to start up. The fail safe option
simply loads the default applications described above.
Each line in the startup file should contain a command to start an application.
A sample startup file might look this:
<start of file>
twm
smproxy
xterm
<end of file>
STARTING A SESSION
When xsm starts up, it first checks to see if the user previously
saved any sessions. If no saved sessions exist, xsm starts up a set
of default applications (as described above in the section titled
Default Startup Applications). If at least one session exists, a
session menu is presented. The [-session sessionName] option forces the
specified session to be loaded, bypassing the session menu.
The session menu
The session menu presents the user with a list of sessions to choose from.
The user can change the currently selected session with the mouse, or by
using the up and down arrows on the keyboard. Note that sessions which are
locked (i.e. running on a different display) can not be loaded or deleted.
The following operations can be performed from the session menu:
Load Session
Pressing this button will load the currently selected session. Alternatively,
hitting the Return key will also load the currently selected session, or the
user can double click a session from the list.
Delete Session
This operation will delete the currently selected session, along with all
of the application checkpoint files associated with the session. After
pressing this button, the user will be asked to press the button a second
time in order to confirm the operation.
Default/Fail Safe
xsm will start up a set of default applications (as described above
in the section titled Default Startup Applications). This is useful
when the user wants to start a fresh session, or if the session configuration
files were corrupted and the user wants a "fail safe" session.
Cancel
Pressing this button will cause xsm to exit. It can also be used to
cancel a "Delete Session" operation.
CONTROLLING A SESSION
After xsm determines which session to load, it brings up its main
window, then starts up all applications that are part of
the session. The title bar for the session manager's main window will
contain the name of the session that was loaded.
The following options are available from xsm's main window:
Client List
Pressing this button brings up a window containing a list of all clients that
are in the current session. For each client, the host machine that the client
is running on is presented. As clients are added and removed from the session,
this list is updated to reflect the changes. The user is able to control how
these clients are restarted (see below).
By pressing the View Properties
button, the user can view the session management properties associated with
the currently selected client.
By pressing the Clone button, the user can start a copy of the selected
application.
By pressing the Kill Client button, the user can remove a client from
the session.
By selecting a restart hint from the Restart Hint menu, the user can
control the restarting of a client. The following hints are available:
-
The Restart If Running hint indicates that the client should be
restarted in the next session if it is connected to the session manager at
the end of the current session.
-
The Restart Anyway hint indicates that the client should be restarted
in the next session even if it exits before the current session is terminated.
-
The Restart Immediately hint is similar to the Restart Anyway hint,
but in addition, the client is meant to run continuously. If the client exits,
the session manager will try to restart it in the current session.
-
The Restart Never hint indicates that the client should not be restarted
in the next session.
Note that all X applications may not be "session aware". Applications that
are not session aware are ones that do not support the X Session Management
Protocol or they can not be detected by the Session Management Proxy (see the
section titled THE PROXY). xsm allows the user to manually add
such applications to the session. The bottom of the Client List window
contains a text entry field in which application commands can be typed in.
Each command should go on its own line. This information will be saved with
the session at checkpoint or shutdown time. When the session is restarted,
xsm will restart these applications in addition to the regular "session
aware" applications.
Pressing the Done button removes the Client List window.
Session Log...
The Session Log window presents useful information about the session. For
example, when a session is restarted, all of the restart commands will be
displayed in the log window.
Checkpoint
By performing a checkpoint, all applications that are in the session are
asked to save their state. Not every application will save its complete
state, but at a minimum, the session manager is guaranteed that it will
receive the command required to restart the application (along with all
command line options). A window manager participating in the session
should guarantee that the applications will come back up with the same
window configurations.
If the session being checkpointed was never assigned a name, the user will
be required to specify a session name. Otherwise, the user can perform the
checkpoint using the current session name, or a new session name can be
specified. If the session name specified already exists, the user will be
given the opportunity to specify a different name or to overwrite the
already existing session. Note that a session which is locked can not be
overwritten.
When performing a checkpoint, the user must specify a Save Type
which informs the applications in the session how much state they should save.
The Local
type indicates that the application should save enough information to restore
the state as seen by the user. It should not affect the state as seen by
other users. For example, an editor would create a temporary file containing
the contents of its editing buffer, the location of the cursor, etc...
The Global
type indicates that the application should commit all of its data to
permanent, globally accessible storage. For example, the editor would
simply save the edited file.
The Both
type indicates that the application should do both of these. For example,
the editor would save the edited file, then create a temporary file with
information such as the location of the cursor, etc...
In addition to the Save Type, the user must specify an
Interact Style.
The None type indicates that the application should not interact with
the user while saving state.
The Errors type indicates that the application may interact with
the user only if an error condition arises.
The Any type indicates that the application may interact with
the user for any purpose. Note that xsm will only allow one
application to interact with the user at a time.
After the checkpoint is completed, xsm will, if necessary, display a
window containing the list of applications which did not report a successful
save of state.
Shutdown
A shutdown provides all of the options found in a checkpoint, but in addition,
can cause the session to exit. Note that if the interaction style is
Errors or Any, the user may cancel the shutdown. The user may
also cancel the shutdown if any of the applications report an
unsuccessful save of state.
The user may choose to shutdown the session with our without performing a
checkpoint.
HOW XSM RESPONDS TO SIGNALS
xsm will respond to a SIGTERM signal by performing a shutdown with
the following options: fast, no interaction, save type local. This allows
the user's session to be saved when the system is being shutdown. It can
also be used to perform a remote shutdown of a session.
xsm will respond to a SIGUSR1 signal by performing a checkpoint with
the following options: no interaction, save type local. This signal can be
used to perform a remote checkpoint of a session.
THE PROXY
Since not all applications have been ported to support the X Session
Management Protocol, a proxy service exists to allow "old" clients to
work with the session manager. In order for the proxy to detect an
application joining a session, one of the following must be true:
- The application maps a top level window containing the
WM_CLIENT_LEADER property. This property provides a pointer to
the client leader window which contains the WM_CLASS, WM_NAME,
WM_COMMAND, and WM_CLIENT_MACHINE properties.
or ...
- The application maps a top level window which does not contain the
WM_CLIENT_LEADER property. However, this top level window
contains the WM_CLASS, WM_NAME, WM_COMMAND, and
WM_CLIENT_MACHINE properties.
An application that support the WM_SAVE_YOURSELF protocol will receive
a WM_SAVE_YOURSELF client message each time the session manager issues
a checkpoint or shutdown. This allows the application to save state. If
an application does not support the WM_SAVE_YOURSELF protocol, then
the proxy will provide enough information to the session manager to restart
the application (using WM_COMMAND), but no state will be restored.
REMOTE APPLICATIONS
xsm requires a remote execution protocol in order to restart
applications on remote machines. Currently, xsm supports the
rstart protocol. In order to restart an application on remote
machine X, machine X must have rstart installed. In
the future, additional remote execution protocols may be supported.