Manpage of TRIDENT
Section: Devices and Network Interfaces (4) Updated: Version 126.96.36.199 Index
Return to Main Contents
trident - Trident video driver
Identifier N'34' devname N'34'
is an XFree86 driver for Trident video cards. The driver is fully
accelerated, and provides support for the following framebuffer depths:
1, 4, 8, 15, 16, and 24. Multi-head configurations
are supported. The XvImage extension is supported on all Blade and Image
series cards. Currently the ZOOM feature doesn't work properly on the Image
driver supports PCI,AGP and ISA video cards based on the following
Blade3D, CyberBlade series i1, i7 (DSTN), i1, i1 (DSTN), Ai1, Ai1 (DSTN),
3DImage975, 3DImage985, Cyber9520, Cyber9525, Cyber9397, Cyber9397DVD
9682, 9685, Cyber9382, Cyber9385, Cyber9388
9440AGi, 9660, 9680
Please refer to XF86Config(5x) for general configuration
details. This section only covers configuration details specific to this
The following driver
Option N'34'SWCursorN'34' N'34' boolean N'34'
Enable or disable the SW cursor. Default: off.
Option N'34'NoAccelN'34' N'34' boolean N'34'
Disable or enable acceleration. Default: acceleration is enabled.
Option N'34'PciRetryN'34' N'34' boolean N'34'
Enable or disable PCI retries. Default: off.
Option N'34'CyberShadowN'34' N'34' boolean N'34'
For Cyber chipsets only, turn off shadow registers. If you only see
a partial display - this may be the option for you. Default: on.
Option N'34'CyberStretchN'34' N'34' boolean N'34'
For Cyber chipsets only, turn on stretching. When the resolution is lower
than the LCD's screen, this option will stretch the graphics mode to
fill the entire LCD. Default: off.
Option N'34'ShadowFBN'34' N'34' boolean N'34'
Enable or disable use of the shadow framebuffer layer. See
shadowfb(4) for further information. Default: off.
Option N'34'VideoKeyN'34' N'34' integer N'34'
This sets the default pixel value for the YUV video overlay key.
NOTE: Default is 0 for depth 15 and 24. This needs fixing.
Option N'34'NoPciBurstN'34' N'34' boolean N'34'
Turn off PCI burst mode, PCI Bursting is on by default.
XFree86(1), XF86Config(5x), xf86config(1), Xserver(1), X(7)
Author: Alan Hourihane
This document was created by
using the manual pages.
Time: 20:49:11 GMT, May 23, 2013