Manpages

Manpage of DOSEMU.BIN

DOSEMU.BIN

Section: DOS Emulation (1)
Updated: May, 2001
Index
Return to Main Contents
 

NAME

dosemu.bin, dosdebug - run DOS and DOS programs under Linux  

SYNOPSIS

dosemu.bin [ -ABCcdkVNXtsgKm234OU ] [ -h level ] [ -F file ] [ --Fusers file ] [ --Flibdir directory ] [ --Fimagedir directory ] [ -f file ] [ -L dexefile ] [ -u confvar ] [ -D flags ] [ -M size ] [ -e size ] [ -x size ] [ -P file ] [ -o file ] [ 2> debugfile ] [ -I config-options ] [ -U inpipe[:outpipe] ]

dosdebug  

DESCRIPTION

dosemu.bin is the binary wrapped by the script dosemu (1) which invokes the Linux dos emulator, also known as DOSEMU.
debugfile is an optional file into which all debugging output will be redirected.

dosdebug is used to control or debug an already running DOSEMU.

Although this program is known as the DOS emulator, it is actually a virtual machine for DOS, allowing DOS and programs written for DOS to operate in an environment similar to a standard IBM PC/AT or compatible with an Intel 80x86 processor in real mode. DOSEMU provides emulation of such services as BIOS video, disk, keyboard, serial, and printer; CMOS memory for configuration information; a real time clock; memory allocation through the XMS 3.0 specification, EMS 4.0 and DPMI 0.9.

Because DOSEMU is not really a DOS emulator, a copy of FreeDos is required, which now is preconfigured and part of the official DOSEMU binary distribution. In addition any currently available proprietary DOS (such as MS-DOS, PC-DOS, DR-DOS) can be booted, when properly configured.

 

KERNEL REQUIREMENTS

At present, you will need Linux 2.0.28 or above with the SYSV IPC option (System V InterProcess Communication facilities, see ipc(2)) compiled. SYSV IPC is an option in the configuration setup during a Linux kernel compile.

 

OPTIONS

-A
boot from floppy disk A (does not need to be a real floppy disk, see below)
-B
boot from floppy disk B (does not need to be a real floppy disk, see below)
-C
boot from hard disk C (does not need to be a real hard disk or even a msdos filesystem, see below)
-c
use direct Console video (must be at the console, requires that dos is suid root)
-d
detach from current virtual console or tty and attach to the first free virtual console
-V
use VGA specific video optimizations
-k
use RAW console Keyboard (must be at the console)
-F
Parse this config-script instead of DOSEMU_LIB_DIR/global.conf (you need to run as root on suid DOSEMU for this)
--Fusers
Bypass /etc/dosemu.users and take this file instead (only accepted when dosemu.bin is not suid-root).
--Flibdir
Bypass the default DOSEMU_LIB_DIR (as maybe defined in /etc/dosemu.users) and use this directory instead (only accepted when dosemu.bin is not suid-root).
--Fimagedir
Bypass the default directory for bootdirectory and hdimages (DOSEMU_LIB_DIR) and use this directory instead (only accepted when dosemu.bin is not suid-root).
-f
Parse this config-file instead of .dosemurc
-u
set a user configuration variable. An u_ is prefixed to the name to avoid name clashes. This variable then can be checked in dosemu.conf or DOSEMU_LIB_DIR/global.conf to do some special configuration.
-L
Load and start a DEXE file (special preconfigured bootable hdimage containing just one DOS application)
-I
Parse the string behind -I with the same syntax as global.conf or .dosemurc such as
                dos ... -I 'video { mda }'


This is usefull if you just want to override a given configuration parameter temporary. You also may have a generic configuration by executing a script such as

                dos ... -I "`myconf.sh`"


where myconf.sh is a script writing the configuration to stdout. If you have an alternate configuration file besides .dosrc,

                dos ... -I "`cat myother.conf`"


will do the job. Note however, that you have to quote the parameter behind -I because it is expected to be one argument.

-D
specify which Debugging messages to allow/suppress
-h
dump configuration to stderr and exit (implicit sets -D+c). This is useful for debugging configuration files, you should use -O too to direct the +c type messages to stderr. `level' can be 0, 1 or 2 and controls the amount of configuration parser debug output: No parser debug (0), parser loop debug (1), if_else_endif debug (2).
-H
specify the dosdebug support flags, currently only `1' is is reasonable. with -H1 you force dosemu to wait until the dosdebug terminal has connected. Hence to debug a DOS session from the very beginning you first start dosemu with -H1 and then start dosdebug. DOSEMU will then lock before jumping into the loaded bootsector waiting for dosdebug to connect. Once connected you are in `stopped' state and can set breakpoints or singlestep through the bootstrap code.
-O
use stderr for output of Debugging messages
-o
use this file for output of Debugging messages
-M
set base memory to SIZE Kilobytes
-m
enable internal mouse-support
-P
copy debugging output to FILE
-2,3,4
choose 286, 386, or 486 processor (BE CAREFUL! DOSEMU is not yet 32-bit clean, so if your program detects a 386 or 486 processor and uses 32-bit registers, it might be confused by BIOS functions. If you think this is happening, use -2 to force DOSEMU into 286-mode.)
-U
define inpipe and outpipe for asynchronous control of DOSEMU from an other process. The format is (whithout white spaces between)
                inpipe:outpipe


where `:outpipe' can be omitted. In the latter case no feedback from DOSEMU can be expected.

For security reasons DOSEMU does not create the named pipes itself, so the user is responsible to set the permissions of the pipes correctly. Note that when using this options, the foreign process can control your DOSEMU session (such as entering keystrokes). This option should therefor only used by frontends (such as kdos), which first create the proper named pipes and then launch DOSEMU. A special control command ( ack on ) can be used to force DOSEMU returning handshake taggs via `outpipe' such that the frontend knows when the control command has started or finished and wether it was successful. The format of this tagging is

                SYN: <commandname>
               <any output from the command>
               ACK: code=n


where n is 0 for success. A tiny control terminal, which can serve as example, is the supplied dosctrl programm. It takes just the two pipes as arguments and you may then enter control commands, which of them `help' is the most important one;-) Note that dosctrl does not launch DOSEMU, you have to do it yourself.

 

HARD DISKS

DOSEMU supports four methods of supplying DOS with hard disks:
1.
a virtual disk file residing on a Linux filesystem which emulates a hard drive.
2.
direct access to a DOS partition through a raw disk device (i.e. /dev/hda, /dev/hdb, /dev/sdX).
3.
direct access to an DOS partition through single partition access (i.e. /dev/hda1, /dev/hdb2, /dev/sdxx). You need to run the program mkpartition to enable DOSEMU to access your DOS-partitions with SPA.
4.
access to a Linux filesystem as a "network" drive using the driver emufs.sys supplied with DOSEMU in commands/emufs.sys.

This is explained more thoroughly in QuickStart.

Configuration of DOSEMU's hard disk resources is done by editing dosemu.conf before running DOSEMU. Look at doc/README.txt.

 

FLOPPY DISKS

DOSEMU supports two methods of supplying DOS with floppy disks:
1.
a virtual disk file residing on a Linux filesystem which emulates a floppy drive
2.
direct access to a physical floppy through a raw disk device (i.e. /dev/fd0, /dev/fd1).

This is also explained more thoroughly in QuickStart.

Configuration of DOSEMU's floppy disk resources is done by editing the dosemu.conf before running DOSEMU.

 

VIDEO

DOSEMU may be run on any tty device. However, increased performance and functionality may be had by taking advantage of special features of the Linux console. Those running DOSEMU on the console may wish to investigate the -c, -k, and -V switches, explained more thoroughly in QuickStart. There is also some very brief documentation in the file dosemu.conf, which can be edited for your needs.

In brief, proper use of the console device and the corresponding switches allows the user to view a DOS program in its original color and font, with none of the periodic screen update problems with the generic tty output code.

 

KEYBOARD

Those using DOSEMU on the Linux console may also wish to use the RAW keyboard support. This mode of operation, selected by the -k switch, provides the user with access to the entire keyboard accessible under DOS. Any combination of ALT, CTRL, and SHIFT keys may be used to generate the odd keycodes expected by many DOS programs.

 

PRINTING

The BIOS printer services are emulated through standard UNIX file I/O to a set of files, dosemulpt1, dosemulpt2, and dosemulpt3, corresponding to the DOS printer devices LPT1, LPT2, and LPT3. All characters sent to LPTx will be redirected to the file dosemulptx in the current directory.

WARNING! DOSEMU does not keep the file buffers flushed; therefore, the state of these files is undefined until you actually exit the DOS emulator. Please excuse the inconvenience.

 

DEBUG MESSAGES

Debug messages can be controlled either at the command line or in the configuration file. Take a look at the documentation inside the config.dist file included with DOSEMU in the examples subdirectory, for debugging options. At the command line, you may specify which classes of messages you wish dos to allow. The syntax of this is DOSEMU takes an option "-D FLAGS", where FLAGS is a string of letters which specify which options to print or suppress. DOSEMU parses this string from left to right.


   +   turns the following options on (initial state)
   -   turns the following options off
   a   turns all the options on/off, depending on flag
   0   turns all options off
   1-9 sets the debug level, the higher, the more output
   #   where # is a letter from the valid class list, 
       turns that option off/on depending on the 
       +/- state.

Message Classes:


 d  disk                        R  disk read            W  disk write

 D  int 21h             C  cdrom                        v  video

 X  X support           k  keyboard             i  port I/O

 s  serial              m  mouse                        #  default ints

 p  printer             g  general              c  configuration

 w  warning             h  hardware             I  IPC

 E  EMS                 x  XMS                  M  DPMI

 n  IPX network P  Pkt-driver           S  SOUND

 r  PIC                 T  IO-tracing           Z  PCI-BIOS

 A  ASPI driver Q  mapping driver

Any debugging classes following a + character, up to a - character, will be turned on (non-suppressed). Any after a - character, up to a + character, will be suppressed. The character a acts like a string of all possible debugging classes, so +a turns on all debugging messages, and -a turns off all debugging messages. The characters 0 and 1-9 are also special: 0 turns off all debugging messages, and 1-9 turns on all debugging messages, but set the debug level too.

There is an assumed + at the beginning of the FLAGS string. Some classes, such as error, can not be turned off. In case you didn't redirect stderr, nearly all output to stderr goes to /dev/null.

Some examples:
  "-D+a-v" or "-D1-v"  : all messages but video
  "-D+kd"              : default + keyboard and disk
  "-D0+RW"             : only disk READ and WRITE

Any option letter can occur in any place. Even pointless combinations, such as -D01-a-1+0, will be parsed without error, so be careful. Some options are set by default, some are clear. This is subject to my whim, and will probably change between releases. You can ensure which are set by always explicitly specifying them.

 

SPECIAL KEYS

In RAW keyboard mode (see the -k option), DOSEMU responds to certain key sequences as control functions.

ctrl-scrlock = show 0x32 int vectors
alt-scrlock = show the vm86 registers
rshift-scrlock = generate an int8 (timer)
lshift-scrlock = generate an int9 (keyboard)
ctrl-break = ctrl-break as under DOS.
ctrl-alt-pgup = reboot DOS. Don't trust this!
ctrl-alt-pgdn = exit the emulator

Use <LEFT CTRL>-<LEFT ALT>-<Function key> to switch to another virtual console.

 

MEMORY

The XMS memory support in DOSEMU conforms to Lotus/Intel/Microsoft/AST extended memory specification 3.0. I have implemented all XMS functions except function 0x12 (Reallocate Upper Memory Block).

While I have implemented the UMB functions, they are extremely stupid and will almost always act suboptimally. The next release of DOSEMU should have saner UMB support.

DOSEMU also supports EMS 4.0 and implements DPMI 0.9 (1.0 partially).

 

AUTHOR

DOSEMU (comprised of the files dosemu.bin and dosemu ) is based on version 0.4 of the original program written by Matthias Lautner (no current address that I know of).

Robert Sanders <gt8134b@prism.gatech.edu> was maintaining and enhancing the incarnation of DOSEMU with which this man page was originally distributed. During about 4 years James B. MacLean <macleajb@ednet.ns.ca> was the restless leader of the dosemu team, implementation of DPMI (which made Windows-3.1, dos4gw, djgpp, e.t.c running) happened during his 'governement' and brought the project near to Beta-state. Now Hans Lermen <lermen@fgan.de> is maintaining this funny software.

 

BUGS

There are too many to count, much less list.

Please report bugs to the author. I'd also like to hear about which programs DO work. Just send me a note detailing what program (and what version) you are using, what works and what doesn't, etc.

 

AVAILABILITY

The most recent public version of DOSEMU can be ftp'ed from ftp.dosemu.org in the /pub/dosemu directory, a fast mirror for this is ibiblio.unc.edu:/pub/Linux/system/emulators/dosemu/. If you want to keep up on private developer pre-releases, join the DOSEMU developer team - even just good detailed debug reports are all you need!

 

FILES

/usr/bin/dosemu.bin
The binary
/usr/bin/dosemu
The wrapper script, its recommended not to invoke dosemu.bin directly.
/usr/bin/xdosemu
Same, but invoking DOS in an X window.
$HOME/.dosemu
Per user DOSEMU local directory. This will be created silently, if not existing.
$HOME/.dosemu/tmp
All temporary file creation happens here, we do not use /tmp anymore.
/var/run/dosemu.*
or
$HOME/.dosemu/run
Various files used by DOSEMU including debugger pipes.
$HOME/dosemu/conf
$HOME/dosemu/bin
Various files used by the DOSEMU per-user instance. This directory also holds the global,conf configuration script global.conf for DOSEMU which then includes dosemu.conf
$HOME/dosemu/freedos
Bootdirectory containig the FreeDos part.
dosemu.conf
Main configuration file for DOSEMU. which is included by global.conf
/etc/dosemu.users
or
/etc/dosemu/dosemu.users
For suid-root running binaries: Defines the access rights to DOSEMU on a per user basis and sets some vital configuration. This is the only fix-location configuration file, DOSEMU first looks for /etc/dosemu.users and, if this is not found, for /etc/dosemu/dosemu.users . Via the keyword default_lib_dir= in dosemu.users the systemwide DOSEMU_LIB_DIR directory may be moved elsewere. For more information see ./doc/README.txt
/etc/dosemu/dos.ini
IPX configuration file.

doc/DPR
Dosemu development team: Who is doing which part of the DOSEMU project?
doc/DANG
To help you hack DOSEMU code.
doc/README.*
Various documentation.
QuickStart
To set up DOSEMU quickly.
ChangeLog
Changes in DOSEMU since the last release.
README.bindist
Information on how to use the DOSEMU/FreeDos ready-to-use binary distribution.
README.distributors
Informations for Linux distributors on how to package systemwide installations of DOSEMU.
MSDOS mailing list
For more information, mail to
linux-msdos@vger.rutgers.edu

 

SEE ALSO

dosemu(1), mkfatimage16(1)


 

Index

NAME
SYNOPSIS
DESCRIPTION
KERNEL REQUIREMENTS
OPTIONS
HARD DISKS
FLOPPY DISKS
VIDEO
KEYBOARD
PRINTING
DEBUG MESSAGES
SPECIAL KEYS
MEMORY
AUTHOR
BUGS
AVAILABILITY
FILES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 19:14:53 GMT, November 11, 2024