objdump displays information about one or more object files.
The options control what particular information to display. This
information is mostly useful to programmers who are working on the
compilation tools, as opposed to programmers who just want their
program to compile and work.
objfile...
are the object files to be examined. When you specify archives,
objdump shows information on each of the member object files.
OPTIONS
Where long and short forms of an option are shown together, they are
equivalent. At least one option besides
-l
(--line-numbers) must be given.
-a
--archive-headers
If any files from objfile are archives, display the archive
header information (in a format similar to `ls -l'). Besides the
information you could list with `ar tv', `objdump -a' shows
the object file format of each archive member.
--adjust-vma=offset
When dumping information, first add
offset
to all the section addresses. This is useful if the section addresses
do not correspond to the symbol table, which can happen when putting
sections at particular addresses when using a format which can not
represent section addresses, such as a.out.
-b bfdname
--target=bfdname
Specify the object-code format for the object files to be
bfdname. This may not be necessary; objdump can
automatically recognize many formats. For example,
objdump -b oasys -m vax -h fu.o
display summary information from the section headers (`-h') of
`fu.o', which is explicitly identified (`-m') as a Vax object
file in the format produced by Oasys compilers. You can list the
formats available with the `-i' option.
-C
--demangle
Decode (demangle) low-level symbol names into user-level names.
Besides removing any initial underscore prepended by the system, this
makes C++ function names readable.
--debugging
Display debugging information. This attempts to parse debugging
information stored in the file and print it out using a C like syntax.
Only certain types of debugging information have been implemented.
-d
--disassemble
Display the assembler mnemonics for the machine
instructions from objfile.
This option only disassembles those sections which are
expected to contain instructions.
-D
--disassemble-all
Like -d, but disassemble the contents of all sections, not just
those expected to contain instructions.
--prefix-addresses
When disassembling, print the complete address on each line. This is
the older disassembly format.
--disassemble-zeroes
Normally the disassembly output will skip blocks of zeroes. This
option directs the disassembler to disassemble those blocks, just like
any other data.
-EB
-EL
--endian={big|little}
Specify the endianness of the object files. This only affects
disassembly. This can be useful when disassembling a file format which
does not describe endianness information, such as S-records.
-f
--file-headers
Display summary information from the overall header of
each file in objfile.
-h
--section-headers
--headers
Display summary information from the section headers of the
object file.
--help
Print a summary of the options to
objdump
and exit.
-i
--info
Display a list showing all architectures and object formats available
for specification with -b or -m.
-j name
--section=name
Display information only for section name.
-l
--line-numbers
Label the display (using debugging information) with the filename
and source line numbers corresponding to the object code shown.
Only useful with -d, -D, or -r.
-m machine
--architecture=machine
Specify the architecture to use when disassembling object files. This
can be useful when disassembling object files which do not describe
architecture information, such as S-records. You can list the available
architectures with the -i option.
-r
--reloc
Print the relocation entries of the file. If used with -d or
-d, the relocations are printed interspersed with the
disassembly.
-R
--dynamic-reloc
Print the dynamic relocation entries of the file. This is only
meaningful for dynamic objects, such as certain types of shared
libraries.
-s
--full-contents
Display the full contents of any sections requested.
-S
--source
Display source code intermixed with disassembly, if possible. Implies
-d.
--show-raw-insn
When disassembling instructions, print the instruction in hex as well as
in symbolic form. This is the default except when
--prefix-addresses
is used.
--no-show-raw-insn
When disassembling instructions, do not print the instruction bytes.
This is the default when
--prefix-addresses
is used.
--stabs
Display the contents of the .stab, .stab.index, and .stab.excl
sections from an ELF file. This is only useful on systems (such as
Solaris 2.0) in which .stab debugging symbol-table entries are carried
in an ELF section. In most other file formats, debugging symbol-table
entries are interleaved with linkage symbols, and are visible in the
--syms output.
--start-address=address
Start displaying data at the specified address. This affects the output
of the
-d,
-r
and
-s
options.
--stop-address=address
Stop displaying data at the specified address. This affects the output
of the
-d,
-r
and
-s
options.
-t
--syms
Symbol Table. Print the symbol table entries of the file.
This is similar to the information provided by the `nm' program.
-T
--dynamic-syms
Dynamic Symbol Table. Print the dynamic symbol table entries of the
file. This is only meaningful for dynamic objects, such as certain
types of shared libraries. This is similar to the information
provided by the `nm' program when given the
-D (--dynamic)
option.
--version
Print the version number of
objdump
and exit.
-x
--all-headers
Display all available header information, including the symbol table and
relocation entries. Using `-x' is equivalent to specifying all of
`-a -f -h -r -t'.
SEE ALSO
`binutils'
entry in
info;
The GNU Binary Utilities, Roland H. Pesch (October 1991);
nm(1).
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be included in
translations approved by the Free Software Foundation instead of in
the original English.