exportfsSection: Maintenance Commands (8)
Updated: 18 July 2003
Return to Main Contents
NAMEexportfs - maintain list of NFS exported file systems
SYNOPSIS/usr/sbin/exportfs [-avi] [-o options,..] [client:/path ..]
/usr/sbin/exportfs -r [-v]
/usr/sbin/exportfs [-av] -u [client:/path ..]
DESCRIPTIONThe exportfs command is used to maintain the current table of exported file systems for NFS. This list is kept in a separate file named /var/lib/nfs/xtab which is read by mountd when a remote host requests access to mount a file tree, and parts of the list which are active are kept in the kernel's export table. Normally this xtab file is initialized with the list of all file systems named in /etc/exports by invoking exportfs -a. However, administrators can choose to add and delete individual file systems without modifying /etc/exports using exportfs. exportfs and it's partner program mountd work in one of two modes, a legacy mode which applies to 2.4 and earlier versions of the Linux kernel, and a new mode which applies to 2.6 and later versions providing the nfsd virtual filesystem has been mounted at /proc/fs/nfsd or /proc/fs/nfs. If this filesystem is not mounted in 2.6, the legacy mode is used. In the new mode, exportfs does not give any information to the kernel but only provides it to mountd through the /var/lib/nfs/xtab file. mountd will listen to requests from the kernel and will provide information as needed. In the legacy mode, any export requests which identify a specific host (rather than a subnet or netgroup etc) are entered directly into the kernel's export table as well as being written to /var/lib/nfs/xtab. Further, any mount points listed in /var/lib/nfs/rmtab which match a non host-specific export request will cause an appropriate export entry for the host given in rmtab to be entered into the kernel's export table.
Exporting DirectoriesThe first synopsis shows how to invoke the command when adding new entries to the export table. When using exportfs -a, all directories in exports(5) are added to xtab and the resulting list is pushed into the kernel. The host:/path argument specifies the directory to export along with the host or hosts to export it to. All formats described in exports(5) are supported; to export a directory to the world, simply specify :/path. The export options for a particular host/directory pair derive from several sources. There is a set of default options which can be overridden by entries in /etc/exports (unless the -i option is given). In addition, the administrator may overide any options from these sources using the -o argument which takes a comma-separated list of options in the same fashion as one would specify them in exports(5). Thus, exportfs can also be used to modify the export options of an already exported directory. Modifications of the kernel export table used by nfsd(8) take place immediately after parsing the command line and updating the xtab file. The default export options are sync,ro,root_squash,no_delay.
Unexporting DirectoriesThe third synopsis shows how to unexported a currently exported directory. When using exportfs -ua, all entries listed in xtab are removed from the kernel export tables, and the file is cleared. This effectively shuts down all NFS activity. To remove individial export entries, one can specify a host:/path pair. This deletes the specified entry from xtab and removes the corresponding kernel entry (if any).
Dumping the Export TableInvoking exportfs without further options shows the current list of exported file systems. When giving the -v option, the list of flags pertaining to each export are shown in addition.
EXAMPLESThe following adds all directories listed in /etc/exports to /var/lib/nfs/xtab and pushes the resulting export entries into the kernel:
# exportfs -aTo export the /usr/tmp directory to host djando, allowing asynchronous writes, one would do this:
# exportfs -o async django:/usr/tmp
DEPENDENCIESExporting to IP networks, DNS and NIS domains does not enable clients from these groups to access NFS immediately; rather, these sorts of exports are hints to mountd(8) to grant any mount requests from these clients. This is usually not a big problem, because any existing mounts are preserved in rmtab across reboots. When unexporting a network or domain entry, any current exports to members of this group will be checked against the remaining valid exports and if they themselves are nolonger valid they will be removed.
SEE ALSOexports(5), mountd(8)
AUTHORSOlaf Kirch, <firstname.lastname@example.org>
Neil Brown, <email@example.com>
This document was created by man2html, using the manual pages.
Time: 23:07:31 GMT, March 01, 2024