RESCAN-SCSI-BUS.SH

Section: Maintenance Commands (8)
Updated: March 1998
Index
Return to Main Contents

NAME

rescan-scsi-bus.sh - rescan the SCSI bus.

SYNOPSIS

rescan-scsi-bus.sh [ -l ] [ -w ] [ -c ] [ host... ]

DESCRIPTION

rescan-scsi-bus.sh is a program that is used to rescan the SCSI bus using the SCSI add-single-device feature of the Linux SCSI layer.

OPTIONS

-l: Activates scanning for LUNs 0 .. 7 (default: 0).
-w: Enables scanning for device IDs 0 .. 15 (default: 0 .. 7).
-r: Enables removing of devices (default: disabled).
-c: Enables scanning of channels 0 1 (default: 0).
host: If host adapters are given, only these are scanned (default: all)

AUTHOR

rescan-scsi-bus.sh was written by Kurt Garloff <garloff@suse.de>.

COPYRIGHT

This program is free software. You can use it under the terms of the GNU GPL (General Public License) Version 2 (or any later version, at your option). Note, that the GNU GPL implies, that there is NO WARRANTY at all. Full text of the GPL can be found in /usr/share/common-licenses/GPL file.

AVAILABILITY

rescan-scsi-bus.sh is available from

http://www.garloff.de/kurt/linux/scsidev/

This document was created by man2html, using the manual pages.
Time: 04:48:24 GMT, May 09, 2025