Manpages

Manpage of 3C5X9SETUP

3C5X9SETUP

Section: Maintenance Commands (8)
Updated: January 8, 2001
Index
Return to Main Contents
 

NAME

3c5x9setup - setup program for the 3Com 3x9 cards.  

SYNOPSIS

3c5x9setup [options]  

DESCRIPTION

3c5x9setup is a program that you can use to setup 3Com 3c5x9 series ethercards.  

OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-h, --help
Show summary of options.
-v, --version
Show version of program.
-V, --verbose
Verbose mode
-D, --debug
Show Debug messages
-a, --all
Print all registers
-p, --base-address <port>
Specify port to use
-E, --emergency-rewrite
Re-write a corrupted EEPROM
-f, --force-detection
Force if card is busy
-F, --new-interface <type>
Interface type to be used. This can be 10baseT, 10base2 or AUI.
-P, --new-IOaddress, --new-base-address <port>
New base I/O address
-H, --new-hwaddress <addr>
New base hardware address
-Q, --new-irq <irq>
Specify interrupt number
-w, --write-EEPROM <values>
Write to the EEPROMS with the specified values.
 

SEE ALSO

el3diag(8),  

AUTHOR

This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
SEE ALSO
AUTHOR

This document was created by man2html, using the manual pages.
Time: 01:46:46 GMT, March 29, 2024