ATP-DIAG

Section: Maintenance Commands (8)
Updated: March 8, 2001
Index
Return to Main Contents

NAME

atp-diag - Diagnostic program for Realtek RTL8002/RTL8012 pocket ethernet adaptors.

atp-diag [options]

atp-diag is a diagnostic program for various OEM pocket ethernet adaptors based on the Realtek RTL8002 and RTL8012 chips.

These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.

-h, --help: Show summary of options.
-V, --version: Show version of program.
-v, --verbose: Verbose mode.
-q, --quiet: Be very unverbose.
-a, --all: Print all registers.
-d, --dump: Dump the first page.
-e, --examine <number>: Examine a specified page.
-p, --base-address <port>: Specify port to use (default 0x378).
-i, --irq <irq>: Interupt to use.
-g: Do a ping test.
-r, --reset-ASIC: Reset the ASIC.
-w, --write-EEPROM <values>: Write to the EEPROMS with the specified values. Do not use this, if you do not know what you do!

This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).

This document was created by man2html, using the manual pages.
Time: 21:38:09 GMT, April 19, 2024