EEXPRESS-DIAG

Section: Maintenance Commands (8)
Updated: March 8, 2001
Index
Return to Main Contents

NAME

eexpress-diag - Diagnostic program for Intel EtherExpress 16

eexpress-diag [options]

eexpress-diag is a programm which you can use to diagnose problems with your Intel EtherExpress 16 cards.

These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.

-h, --help: Show summary of options.
-V, --version: Show version of program.
-v, --verbose: Verbose mode.
-a, --all: Print all registers.
-p, --base-address <port>: Specify port to use. Valid values are: 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360
-Q, -i, --irq <irq>: Specify new interrupt. Valid values are: 3-5,9-12,15.
-w, --write-EEPROM <values>: Write to the EEPROMS with the specified values.

This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).

This document was created by man2html, using the manual pages.
Time: 22:23:01 GMT, April 23, 2024