Manpages
GIF2HERC
Section: User Commands (1)Updated:
Index
Return to Main Contents
NAME
gif2herc - Program to GIF images on an IBM PC Hercules graphic card.SYNOPSIS
gif2herc [-q] [-d dither] [-z zoom] [-t bw] [-m map] [-i] [-b] [-h] gif-fileDESCRIPTION
A program to display images saved as GIF files on an IBM PC Hercules graphic card. The program operates as follows:-
Read GIF file header and determine size of the image.
-
Dynamically allocate enough memory to hold all the image internally. One byte
per pixel is always allocated, so a little bit more than width*height (of
screen, not image) bytes are required.
-
Reads the image in. Interlaced images are read correctly, although they are
displayed sequentially.
-
Display first image using the defaults as set by the command line option.
- Goes to interactive mode. For full description of the interactive mode see below.
If no gif-file is given, gif2herc will try to read a GIF file from stdin.
OPTIONS
- -q
-
Quiet mode. Defaults off on MSDOS, on under UNIX. Controls printout of
running scan lines. Use -q- to invert.
- -d dither
-
Sets size of dithering matrix, where dither can be 2,3 or 4 only (for 2x2, 3x3
and 4x4 dithering matrices). Default is 2. Note: the image will be dithered
only if the mapping (see -m) selected dithering mode.
- -z zoom
-
Sets zoom factor of the image. Zoom factor should be power of 2 up to 256.
Default is 1 (no zoom).
- -t bw
-
Sets threshold level for B&W mapping in percent. This threshold level is used
in the different mappings as selected via -m. Default is 19%.
- -m map
-
Select method to map colors to B&W. Mapping can be:
-
- -i Invert the image, i.e. black -> white, white -> black.
-
- -b Disable beeps. Every time the image is complete, or a wrong key was presses, sound is generated. The -b option disables that.
-
- -h Print one line of command line help, similar to Usage above.
Interactive mode
Once the image is displayed, the program goes into an interactive mode which recognizes the following commands:- C - get Color and position
-
In this submenu, a cursor appears and the location and color of the pixel
underneath it are printed. The 4 arrows may be used (shifted for faster
movement) to move the cursor. Any other key will abort this submode.
- D - zoom Down
-
Zoom down by factor of 2 unless current zoom factor is 1.
- H - Increase dither matrix size
-
...unless current size is maximum (4), in which case size is set to minimum
(2).
- I - Invert
-
Invert the image, i.e. white -> black, black -> white.
- M - Method
-
Increment color -> BW mapping method, unless current method is maximum (2), in
which case method is set to minimum (0).
- R - Redraw
-
Redraw the image.
- S - print Status
-
Print status of image and program.
- U - zoom Up
-
Zoom up by factor of 2 unless current zoom factor is 256.
- arrow keys
-
The 4 arrow keys can be used to pan in the desired direction, if the image
overflows in that direction. If the image fits into the screen, arrow keys
are ignored. The panning steps are 1/2 screen if not on image end.
- SPC - abort
-
Space bar may be used to abort current image drawing.
- ESC - abort
- Escape may be used to abort current image drawing.
SEE ALSO
gif2bgi(1), gif2epsn(1), gif2iris(1), gif2ps(1), gif2rgb(1), gif2rle(1), gif2x11(1), gifasm(1), gifbg(1), gifburst(1), gifclip(1), gifclrmp(1), gifcolor(1), gifcomb(1), gifcompose(1), giffix(1), giffiltr(1), gifflip(1), gifhisto(1), gifinter(1), gifinto(1), gifovly(1), gifpos(1), gifrotat(1), gifrsize(1), gifspnge(1), giftext(1), gifwedge(1), icon2gif(1), raw2gif(1), rgb2gif(1), rle2gif(1), text2gif(1)COPYRIGHT
The GIFLIB distribution is Copyright (c) 1997 Eric S. RaymondAUTHORS
Gershon ElberEric S. Raymond <esr@snark.thyrsus.com>
Index
This document was created by man2html, using the manual pages.
Time: 16:23:11 GMT, April 18, 2024