install-netsync

Section: User Commands (1)
Updated: Palm Computing Device Tools
Index
Return to Main Contents

NAME

install-netsync - reads or sets the Network Preferences information on a Palm Device

SYNOPSIS

install-netsync -p /dev/pilot -e -n <hostname> -i <ip> -m <netmask>

DESCRIPTION

install-netsync allows the user to read or change the Network Preferences stored on the Pilot

OPTIONS

-p --port <port>,

Use device file port to communicate with the Palm handheld device. If this is not specified, will look for the $PILOTPORT environment variable. If both are not found, will fall back to /dev/pilot.

-h --help,

Display help synopsis for install-netsync

-v --version,

Display version of install-netsync

-e --enable,

Enable the LanSync operation (instead of local HotSync)

-n --name <hostname>,

Sets the hostname of the remote machine you wish to connect to. This is not the hostname of the Palm device itself

-i --ip,

Set the IP address of the remote machine you wish to connect to. This is not the IP address of the Palm device itself

-m --mask,

Set the netmask of the remote machine you wish to connect to. This is not the netmask address of the Palm device itself

USAGE

The program will connect to a target Palm handheld device, and read or set the Network Preferences information specified or display the Network Preferences stored on the Palm device

KNOWN BUGS

install-netsync has no known bugs.

REPORTING BUGS

Report bugs at http://bugs.pilot-link.org/

AUTHOR

install-netsync was created from the original install-user

application originally written by D. Jeff Dionne <jeff@RyeHam.ee.ryerson.ca>, and was split it out into a separate conduit by JP Rosevear <jpr@ximian.com>

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

This document was created by man2html, using the manual pages.
Time: 13:00:22 GMT, April 25, 2024