# router sub-tree
#
# This is where we collect stats on the chassis of our routers
# (i.e. memory, CPU, temperature). These are kept separate from
# the interfaces themselves since they have quite different
# configuration needs.

Target  --default--
    router          = %auto-target-name%
    snmp-host       = %router%
    # you could set a router-specific community string here:
    # snmp-community    = not-public
    #
    # Provide no default type, since each router will be different,
    # and if we want to specify each model explicitly, or
    # get a warning.
    target-type     = undef

# OID's we'll be using in this tree
OID     cpu1min     1.3.6.1.4.1.9.2.1.57.0
OID     cpu5min     1.3.6.1.4.1.9.2.1.58.0
OID     tempInlet   1.3.6.1.4.1.9.9.13.1.3.1.3.1
OID     tempOutlet  1.3.6.1.4.1.9.9.13.1.3.1.3.3
OID     tempState   1.3.6.1.4.1.9.9.13.1.3.1.6.1
OID     mem5minUsed 1.3.6.1.4.1.9.9.48.1.1.1.5.1
OID     mem5minFree 1.3.6.1.4.1.9.9.48.1.1.1.6.1

datasource  --default--
    rrd-ds-type     =   GAUGE
    rrd-heartbeat   =   1800
    rrd-min         =   undef
    rrd-max         =   undef
    
datasource  cpu1min     ds-source   =   snmp://%snmp%/cpu1min
datasource  cpu5min     ds-source   =   snmp://%snmp%/cpu5min
datasource  tempInlet   ds-source   =   snmp://%snmp%/tempInlet
datasource  tempOutlet  ds-source   =   snmp://%snmp%/tempOutlet
datasource  tempState   ds-source   =   snmp://%snmp%/tempState
datasource  mem5minUsed ds-source   =   snmp://%snmp%/mem5minUsed
datasource  mem5minFree ds-source   =   snmp://%snmp%/mem5minFree

targetType  Cisco-7200-Router
    ds  =   "cpu1min, cpu5min, tempInlet, tempOutlet, mem5minUsed, mem5minFree"
    view    =   "cpu: cpu1min cpu5min,
                    temperature: tempInlet tempOutlet,
                    memory: mem5minUsed mem5minFree"

targetType  Cisco-7500-Router
    ds  =   "cpu1min, cpu5min, tempInlet, tempOutlet, mem5minUsed, mem5minFree"
    view    =   "cpu: cpu1min cpu5min,
                    temperature: tempInlet tempOutlet,
                    memory: mem5minUsed mem5minFree"

# 3600 routers do not report temperature -- they only
# report tempterature states:
#               normal(1),
#               warning(2),
#               critical(3),
#               shutdown(4),
#               notPresent(5) 

targetType  Cisco-3600-Router
    ds  =   "cpu1min, cpu5min, tempState, mem5minUsed, mem5minFree"
    view    =   "cpu: cpu1min cpu5min,
                    tempAlarm: tempState,
                    memory: mem5minUsed mem5minFree"

# 2500 routers don't even report the temperature. Feh.

targetType Cisco-2500-Router
    ds  =   "cpu1min, cpu5min, mem5minUsed, mem5minFree"
    view    =   "cpu: cpu1min cpu5min,
                    memory: mem5minUsed mem5minFree"

html short-desc                 Router Chassis

graph   cpu1min
    units   =   "%"
    color   =   dark-green
    draw-as =   AREA
    y-axis  =   "Percent CPU utilization"
    legend  =   "1 minute CPU utilization"
    # fixed y-axis, since this is a percentage
    y-min   =   0
    y-max   =   100

graph   cpu5min
    units   =   "%"
    color   =   blue
    y-axis  =   "Percent CPU utilization"
    legend  =   "5 minute CPU utilization"
    # fixed y-axis, since this is a percentage
    y-min   =   0
    y-max   =   100

graph   tempInlet
    color   =   dark-green
    draw-as =   AREA
    y-axis  =   "degrees Centigrade"
    units   =   "°"
    space   =   ""
    legend  =   "Inlet temperature in C"
    precision   =   integer

graph   tempOutlet
    color   =   blue
    y-axis  =   "degrees Centigrade"
    units   =   "°"
    space   =   ""
    legend  =   "Outlet temperature in C"
    precision   =   integer

graph   mem5minUsed
    color   =   dark-green
    draw-as =   AREA
    y-axis  =   "Bytes"
    legend  =   "5 minute used memory"

graph   mem5minFree
    color   =   blue
    y-axis  =   "Bytes"
    legend  =   "5 minute free memory"