# Home page: http://smartmontools.sourceforge.net # # $Id: README,v 1.1 2003/02/12 19:58:33 ballen4705 Exp $ # # Copyright (C) 2002 Bruce Allen # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the Free # Software Foundation; either version 2, or (at your option) any later # version. # # You should have received a copy of the GNU General Public License (for # example COPYING); if not, write to the Free Software Foundation, Inc., 675 # Mass Ave, Cambridge, MA 02139, USA. # # This code was originally developed as a Senior Thesis by Michael Cornwell # at the Concurrent Systems Laboratory (now part of the Storage Systems # Research Center), Jack Baskin School of Engineering, University of # California, Santa Cruz. http://ssrc.soe.ucsc.edu/ This directory contains executable bash scripts, that are intended for use with the -m address -M exec /path/to/an/executable Directive in /etc/smartd.conf. Details about how to use this Directive may be found in the man pages for smartd and smartd.conf. man 8 smartd man 5 smartd.conf should display those pages on your system. If you wish to contribute additional scripts to this collection, please email them to , and include a one-line description to use below. The files contained in this directory are: Example1: appends values of $SMARTD_* environment variables and the output of smartctl -a to the normal email message, and sends that to the email address listed as the argument to the -m Directive. Example2: Appends output of smartctl -a to the normal email message and sends that to the email address listed as the argument to the -m Directive. Example3: Uses wall(1) to send a warning message to all users, then powers down the machine.