#! /bin/sh
#
# network	Establish the network connection.
#
# Version:	@(#)network  2.2  19-Apr-1999 miquels@cistron.nl
#

case "`uname -r`" in
        2.0.*) ADDROUTE="yes" ;;
        *)     ADDROUTE="" ;;
esac

# Configure the loopback device.
ifconfig lo 127.0.0.1
[ "$ADDROUTE" ] && route add -net 127.0.0.0 dev lo

# Configure the ethernet device or start SLIP/PPP below.
IPADDR="192.168.1.1"		# Your IP address.
NETMASK="255.255.255.0"		# Your netmask.
NETWORK="192.168.1.0"		# Your network address.
BROADCAST="192.168.1.255"	# Your broadcast address (blank if none).
GATEWAY=""			# Your gateway address.

ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
[ "$ADDROUTE" ] && route add -net ${NETWORK}
[ "$GATEWAY" ]  && route add default gw ${GATEWAY}