Copyright (C) 2000-2012 |
GNU Info (am-utils.info)FSinfo filesystemsFSinfo filesystems ================== The list of physically attached filesystems follows the machine attributes. These should define all the filesystems available from this machine, whether exported or not. In addition to the device name, filesystems have several attributes, such as filesystem type, mount options, and `fsck' pass number which are needed to generate `fstab' entries. filesystem : "fs" <DEVICE> "{" list(fs_data) "}" ; fs_data : fs_data_attr "=" <STRING> | mount ; fs_data_attr : "fstype" | "opts" | "passno" | "freq" | "dumpset" | "log" ; Here, <DEVICE> is the device name of the disk (for example, `/dev/dsk/2s0'). The device name is used for building the mount maps and for the `fstab' file. The attributes that can be specified are shown in the following section. The FSinfo configuration file for `dylan.doc.ic.ac.uk' is listed below. host dylan.doc.ic.ac.uk fs /dev/dsk/0s0 { fstype = swap } fs /dev/dsk/0s0 { fstype = hfs opts = rw,noquota,grpid passno = 0; freq = 1; mount / { } } fs /dev/dsk/1s0 { fstype = hfs opts = defaults passno = 1; freq = 1; mount /usr { local { exportfs "dougal eden dylan zebedee brian" volname /nfs/hp300/local } } } fs /dev/dsk/2s0 { fstype = hfs opts = defaults passno = 1; freq = 1; mount default { exportfs "toytown_clients hangers_on" volname /home/dylan/dk2 } } fs /dev/dsk/3s0 { fstype = hfs opts = defaults passno = 1; freq = 1; mount default { exportfs "toytown_clients hangers_on" volname /home/dylan/dk3 } } fs /dev/dsk/5s0 { fstype = hfs opts = defaults passno = 1; freq = 1; mount default { exportfs "toytown_clients hangers_on" volname /home/dylan/dk5 } }
automatically generated by info2www version 1.2.2.9 |