GNU Info

(fdutils.info)xdfcopy

---

Prev: superformat Up: Commands

---

Enter node , (file) or (file)node

xdfcopy
=======

     `xdfcopy' [`-'FORMAT-ID] [`-d'] [`-n'] [`-h' HEAD-SKEW] [`-t' CYLINDER-SKEW] [`-T'
     END-CYLINDER] [SOURCE] TARGET

   `Xdfcopy' is a utility to copy and format XDF disks. XDF (eXtended
Density Format) is a format used by OS/2 which can hold 1840KB of data
(on a 3 1/2 high density disk). Its advantage over 2m formats is that it
is faster: 38KB/s. Because of this fast speed, I extended the XDF
standard to higher capacities (1992KB) with a transfer rate of 45KB/s. I
called the new formats XXDF.

   This program works best with kernels newer than 2.0.0.

   If both source and target are given, xdfcopy copies the disk image
from file to floppy disk or vice-versa. When copying to a floppy disk,
the disk is first formatted, unless the `-n' option is given.

   If no source is given, the target is only formatted. In this case,
the target must be a floppy drive.

Options
-------

Selecting a format
..................

   Formats are selected by the format_id. The following formats are
understood:

`0'
     Formats a 5 1/4 XDF disk (1520 KB, 45.6 KB/s).

`1'
     Formats a 3 1/2 high density XDF disk (1840 KB, 38.3 KB/s).

`2'
     Formats a 3 1/2 extra density XDF disk (3680 KB, 102 KB/s)

`3'
     Formats a 3 1/2 high density XXDF disk (1920 KB, 45 KB/s)

`4'
     Formats a 3 1/2 extra density XXDF disk (3840 KB, 90 KB/s)

Misc options
------------

`-D DOSDRIVE'
     Describes the DOS drive letter for mformat. If this option is
     given, an MS-DOS filesystem is automatically installed on the disk
     after the low-level format is complete. In order for this to work,
     the drive has to be configured to accept the 23x2x80 geometry in
     your /etc/mtools or your ~/.mtoolsrc file. Moreover, this only
     works with a version of mtools that is more recent than 3.0.

     Example of a working mtoolsrc line:
          A /dev/fd0  0  0 0  0

     Examples of a non-working mtoolsrc line:
          A /dev/fd0 12 80 2 18

`-n'
     Don't format the disk before copying the disk image to the disk.

Options for power users
-----------------------

`-t CYLINDER SKEW'
     Uses a different track skew than the default (14). For more
     details on skews, Note: superformat. In this version of xdfcopy,
     the `-t' parameter is ignored.

`-h HEAD SKEW'
     Uses a different head skew than the default (0) In this version,
     this parameter is ignored

`-d'
     Debugging. For each read or write operation, the time it took to
     complete the operation is printed (in milliseconds). This can be
     used to optimize the skews.

`-T END-CYLINDERS'
     Tells how many cylinders to format.  With the XXDF formats, it is
     actually possible to format up to 83 cylinders, yielding a format
     of up to 1992KB on a 3 1/2 high density disk.