GNU Info

Info Node: (libc.info)Temporary Files

(libc.info)Temporary Files


Prev: Making Special Files Up: File System Interface
Enter node , (file) or (file)node

Temporary Files
===============

   If you need to use a temporary file in your program, you can use the
`tmpfile' function to open it.  Or you can use the `tmpnam' (better:
`tmpnam_r') function to provide a name for a temporary file and then
you can open it in the usual way with `fopen'.

   The `tempnam' function is like `tmpnam' but lets you choose what
directory temporary files will go in, and something about what their
file names will look like.  Important for multi-threaded programs is
that `tempnam' is reentrant, while `tmpnam' is not since it returns a
pointer to a static buffer.

   These facilities are declared in the header file `stdio.h'.

 - Function: FILE * tmpfile (void)
     This function creates a temporary binary file for update mode, as
     if by calling `fopen' with mode `"wb+"'.  The file is deleted
     automatically when it is closed or when the program terminates.
     (On some other ISO C systems the file may fail to be deleted if
     the program terminates abnormally).

     This function is reentrant.

     When the sources are compiled with `_FILE_OFFSET_BITS == 64' on a
     32-bit system this function is in fact `tmpfile64', i.e. the LFS
     interface transparently replaces the old interface.

 - Function: FILE * tmpfile64 (void)
     This function is similar to `tmpfile', but the stream it returns a
     pointer to was opened using `tmpfile64'.  Therefore this stream can
     be used for files larger then 2^31 bytes on 32-bit machines.

     Please note that the return type is still `FILE *'.  There is no
     special `FILE' type for the LFS interface.

     If the sources are compiled with `_FILE_OFFSET_BITS == 64' on a 32
     bits machine this function is available under the name `tmpfile'
     and so transparently replaces the old interface.

 - Function: char * tmpnam (char *RESULT)
     This function constructs and returns a valid file name that does
     not refer to any existing file.  If the RESULT argument is a null
     pointer, the return value is a pointer to an internal static
     string, which might be modified by subsequent calls and therefore
     makes this function non-reentrant.  Otherwise, the RESULT argument
     should be a pointer to an array of at least `L_tmpnam' characters,
     and the result is written into that array.

     It is possible for `tmpnam' to fail if you call it too many times
     without removing previously-created files.  This is because the
     limited length of the temporary file names gives room for only a
     finite number of different names.  If `tmpnam' fails it returns a
     null pointer.

     *Warning:* Between the time the pathname is constructed and the
     file is created another process might have created a file with the
     same name using `tmpnam', leading to a possible security hole.  The
     implementation generates names which can hardly be predicted, but
     when opening the file you should use the `O_EXCL' flag.  Using
     `tmpfile' or `mkstemp' is a safe way to avoid this problem.

 - Function: char * tmpnam_r (char *RESULT)
     This function is nearly identical to the `tmpnam' function, except
     that if RESULT is a null pointer it returns a null pointer.

     This guarantees reentrancy because the non-reentrant situation of
     `tmpnam' cannot happen here.

     *Warning*: This function has the same security problems as
     `tmpnam'.

 - Macro: int L_tmpnam
     The value of this macro is an integer constant expression that
     represents the minimum size of a string large enough to hold a
     file name generated by the `tmpnam' function.

 - Macro: int TMP_MAX
     The macro `TMP_MAX' is a lower bound for how many temporary names
     you can create with `tmpnam'.  You can rely on being able to call
     `tmpnam' at least this many times before it might fail saying you
     have made too many temporary file names.

     With the GNU library, you can create a very large number of
     temporary file names.  If you actually created the files, you
     would probably run out of disk space before you ran out of names.
     Some other systems have a fixed, small limit on the number of
     temporary files.  The limit is never less than `25'.

 - Function: char * tempnam (const char *DIR, const char *PREFIX)
     This function generates a unique temporary file name.  If PREFIX
     is not a null pointer, up to five characters of this string are
     used as a prefix for the file name.  The return value is a string
     newly allocated with `malloc', so you should release its storage
     with `free' when it is no longer needed.

     Because the string is dynamically allocated this function is
     reentrant.

     The directory prefix for the temporary file name is determined by
     testing each of the following in sequence.  The directory must
     exist and be writable.

        * The environment variable `TMPDIR', if it is defined.  For
          security reasons this only happens if the program is not SUID
          or SGID enabled.

        * The DIR argument, if it is not a null pointer.

        * The value of the `P_tmpdir' macro.

        * The directory `/tmp'.

     This function is defined for SVID compatibility.

     *Warning:* Between the time the pathname is constructed and the
     file is created another process might have created a file with the
     same name using `tempnam', leading to a possible security hole.
     The implementation generates names which can hardly be predicted,
     but when opening the file you should use the `O_EXCL' flag.  Using
     `tmpfile' or `mkstemp' is a safe way to avoid this problem.

 - SVID Macro: char * P_tmpdir
     This macro is the name of the default directory for temporary
     files.

   Older Unix systems did not have the functions just described.
Instead they used `mktemp' and `mkstemp'.  Both of these functions work
by modifying a file name template string you pass.  The last six
characters of this string must be `XXXXXX'.  These six `X's are
replaced with six characters which make the whole string a unique file
name.  Usually the template string is something like
`/tmp/PREFIXXXXXXX', and each program uses a unique PREFIX.

   *Note:* Because `mktemp' and `mkstemp' modify the template string,
you _must not_ pass string constants to them.  String constants are
normally in read-only storage, so your program would crash when
`mktemp' or `mkstemp' tried to modify the string.

 - Function: char * mktemp (char *TEMPLATE)
     The `mktemp' function generates a unique file name by modifying
     TEMPLATE as described above.  If successful, it returns TEMPLATE
     as modified.  If `mktemp' cannot find a unique file name, it makes
     TEMPLATE an empty string and returns that.  If TEMPLATE does not
     end with `XXXXXX', `mktemp' returns a null pointer.

     *Warning:* Between the time the pathname is constructed and the
     file is created another process might have created a file with the
     same name using `mktemp', leading to a possible security hole.  The
     implementation generates names which can hardly be predicted, but
     when opening the file you should use the `O_EXCL' flag.  Using
     `mkstemp' is a safe way to avoid this problem.

 - Function: int mkstemp (char *TEMPLATE)
     The `mkstemp' function generates a unique file name just as
     `mktemp' does, but it also opens the file for you with `open'
     (Note: Opening and Closing Files).  If successful, it modifies
     TEMPLATE in place and returns a file descriptor for that file open
     for reading and writing.  If `mkstemp' cannot create a
     uniquely-named file, it returns `-1'.  If TEMPLATE does not end
     with `XXXXXX', `mkstemp' returns `-1' and does not modify TEMPLATE.

     The file is opened using mode `0600'.  If the file is meant to be
     used by other users this mode must be changed explicitly.

   Unlike `mktemp', `mkstemp' is actually guaranteed to create a unique
file that cannot possibly clash with any other program trying to create
a temporary file.  This is because it works by calling `open' with the
`O_EXCL' flag, which says you want to create a new file and get an
error if the file already exists.

 - Function: char * mkdtemp (char *TEMPLATE)
     The `mkdtemp' function creates a directory with a unique name.  If
     it succeeds, it overwrites TEMPLATE with the name of the
     directory, and returns TEMPLATE.  As with `mktemp' and `mkstemp',
     TEMPLATE should be a string ending with `XXXXXX'.

     If `mkdtemp' cannot create an uniquely named directory, it returns
     `NULL' and sets ERRNO appropriately.  If TEMPLATE does not end
     with `XXXXXX', `mkdtemp' returns `NULL' and does not modify
     TEMPLATE.  ERRNO will be set to `EINVAL' in this case.

     The directory is created using mode `0700'.

   The directory created by `mkdtemp' cannot clash with temporary files
or directories created by other users.  This is because directory
creation always works like `open' with `O_EXCL'.  Note: Creating
Directories.

   The `mkdtemp' function comes from OpenBSD.


automatically generated by info2www version 1.2.2.9