SCSI tape drives (From the SCSI HOWTO) Drives using both
fixed and variable length blocks smaller than the driver
buffer length (set to 32k in the distribution sources)
are supported. Virtually all drives should work. (Send
mail if you know of any incompatible drives.)
Seagate Sidewinder 50 AIT (on ICP 6527 RAID-controller)
QIC-117, QIC-40/80, QIC-3010/3020 (QIC-WIDE) drives Most
tape drives using the floppy controller should work.
Various dedicated controllers (Colorado FC-10/FC-20,
Mountain Mach-2, Iomega Tape Controller II) are also
supported
here
ATAPI tape drives For these an alpha driver (ide-tape.c)
is available in the kernel. ATAPI tape drives supported
are