Whole document tree
Linux DPT Hardware RAID mini-HOWTO
Ram Samudrala (me@ram.org)
v1.6, February 20, 2002
How to set up hardware RAID under Linux.
1. Introduction
2. Supported controllers
3. What hardware should be used?
4. Installation
5. Usage
6. Features in the EATA DMA driver
7. Troubleshooting
- 7.1 Upon bootup, no SCSI hosts are detected
- 7.2 RAID configuration shows up as N different disks
- 7.3 Machine/controller is shut down in the middle of a format
- 7.4 SCSI_ABORT_BUSY errors produced during initial filesystem format
- 7.5 If all fails...
8. References
9. Acknowledgements
Next Previous Contents