Whole document tree
SANE: Supported Devices
SANE: Supported Devices
The following table summarizes the devices supported by sane-backends-1.0.10.
This is only a summary!
Please consult the manpages and the author-supplied webpages
for more detailed (and usually important) information
concerning each backend.
There are special tables for parallel port and
USB scanners from
Jonathan Buzzard .
If you have new information or corrections, please send
e-mail to sane-devel, the SANE mailing
list .
For an explanation of the tables, see the
legend .
There are tables for scanners ,
still cameras ,
video cameras ,
APIs , and
meta backends .
Manufacturers :
Abaton ,
Acer Peripherals ,
Across Technologies ,
Actown ,
Adlib ,
AGFA ,
Apple ,
Aries ,
Artec ,
Artec/Ultima ,
Avision ,
Bell and Howell ,
Benq ,
BlackWidow ,
Boeder ,
BrightScan ,
Canon ,
Compaq ,
Cybercom ,
Devcom ,
Dextra ,
EDGE ,
Epson ,
Escom ,
Escort ,
Fujitsu ,
Gallery ,
Genius ,
Guillemot / Hercules ,
Hewlett-Packard ,
Komodo ,
LEO ,
Lexmark ,
Linotype Hell ,
Medion ,
Medion/Lifetec/Tevion/Cytron ,
Medion/Tevion/LifeTec ,
Memorex ,
Microtek ,
Minolta ,
Mitsubishi ,
Mustek ,
NEC ,
Nikon ,
Packard Bell ,
Panasonic ,
PIE ,
PIOTECH ,
Plustek ,
Primax ,
Prolink ,
Relisys ,
Ricoh ,
Scanport ,
Sceptre ,
Sharp ,
Siemens ,
Tamarack ,
Targa ,
Tevion ,
Trust ,
Trust Easy Connect ,
Umax ,
Visioneer ,
Viviscan ,
Vobis ,
Vuego
Link(s):
http://www.everex.com/
Model
Interface
Status
Comment
Backend
Manpage
Scan 300/GS
SCSI
alpha
All known modes and functions supported
abaton (v0.1)
sane-abaton
Scan 300/S
SCSI
untested
Untested, use with caution
abaton (v0.1)
sane-abaton
Comment: Company was renamed to Benq .
Model
Interface
Status
Comment
Backend
Manpage
FS-1130
SCSI
beta
FCC ID LUZFS1130
leo
(v1.0-10)
sane-leo
Model
Interface
Status
Comment
Backend
Manpage
ACT Scan I 30
SCSI
untested
sub model VM3520A
teco1
(v1.0-9)
sane-teco1
Model
Interface
Status
Comment
Backend
Manpage
JetScan630
SCSI
stable
pie
(v1.0)
sane-pie
JetScan636PRO
SCSI
untested
pie
(v1.0)
sane-pie
Link(s):
http://www.agfa.com/
Link(s):
http://developer.apple.com/
Model
Interface
Status
Comment
Backend
Manpage
Apple Scanner
SCSI
alpha
4bit, 16 shades of gray
apple (v0.31)
sane-apple
ColorOneScanner
SCSI
alpha
truecolor (needs much work) but it scans in non color modes.
apple (v0.31)
sane-apple
OneScanner
SCSI
alpha
8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work.
apple (v0.31)
sane-apple
Model
Interface
Status
Comment
Backend
Manpage
Scan-It Pro 4800
Parport (SPP, EPP)
stable
use driver-switch mov=2
plustek
(v0.45)
sane-plustek
Link(s):
http://www.artecusa.com/
Model
Interface
Status
Comment
Backend
Manpage
AM12e+
Parport
unsupported
Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e?
unsupported (v2003-01-28)
?
E+ 48U
USB
alpha
CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners.
artec_eplus48u
(v0.0.10, NEW! )
sane-artec_eplus48u
Ultima 2000
USB
beta
works, only product id 0x4002 is supported
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Ultima 2000 (0x4001)
USB
unsupported
Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. Chips: WINBOND W6662CF, POWERVISION PV108630-C2L, ATC 93LC46 (EEPROM?). The chips look similar to that reported on the umax1220u page. The scanner with product id 0x4002 is supported by the gt68xx backend.
unsupported (v2003-01-28)
?
Ultima 2000 e+
USB
untested
Testers welcome
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Link(s):
http://www.artecusa.com/
Model
Interface
Status
Comment
Backend
Manpage
A6000C
SCSI
stable
all modes working
artec
(v0.5.16)
sane-artec
A6000C PLUS
SCSI
stable
f/w <= v1.92 alpha, f/w >= v1.93 OK
artec
(v0.5.16)
sane-artec
AM12S
SCSI
stable
all modes working
artec
(v0.5.16)
sane-artec
AS6E
Parport
alpha
Requires the program 'as6edriver' to run.
as6e
(v0.4.2)
sane-as6e
AT3
SCSI
stable
all modes working
artec
(v0.5.16)
sane-artec
AT6
SCSI
alpha
First scan works, subsequent fail until scanner power cycle.
artec
(v0.5.16)
sane-artec
AT12
SCSI
stable
all modes working
artec
(v0.5.16)
sane-artec
Link(s):
http://www.avision.com
Link(s):
http://www.bhscanners.com/
Model
Interface
Status
Comment
Backend
Manpage
COPISCAN II 2135
SCSI
untested
Simplex Scanner
bh
(v1.0-4)
sane-bh
COPISCAN II 2137(A)
SCSI
beta
Simplex Scanner (with ACE) - limited testing
bh
(v1.0-4)
sane-bh
COPISCAN II 2138A
SCSI
untested
Simplex Scanner with ACE
bh
(v1.0-4)
sane-bh
COPISCAN II 3238
SCSI
untested
Simplex Scanner
bh
(v1.0-4)
sane-bh
COPISCAN II 3338(A)
SCSI
untested
Simplex Scanner (with ACE)
bh
(v1.0-4)
sane-bh
COPISCAN II 6338
SCSI
beta
Duplex Scanner with ACE - development model
bh
(v1.0-4)
sane-bh
Link(s):
http://www.benq.com
Comment: Formerly Acer Peripherals
Link(s):
http://www.blackwidow.co.uk/
Model
Interface
Status
Comment
Backend
Manpage
BW4800SP
SCSI
stable
rebadged Artec AT3
artec
(v0.5.16)
sane-artec
Model
Interface
Status
Comment
Backend
Manpage
Sm@rtScan Slim Edition
USB
beta
similar to Artec Ultima 2000
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Model
Interface
Status
Comment
Backend
Manpage
BrighScan OpticPro
Parport (SPP, EPP)
stable
Reported as P12
plustek
(v0.45)
sane-plustek
Link(s):
http://www.canon.com/
Model
Interface
Status
Comment
Backend
Manpage
CanoScan 300
SCSI
alpha
1 pass; flatbed scanner
canon
(v1.10)
sane-canon
CanoScan 600
SCSI
alpha
canon
(v1.10)
sane-canon
CanoScan 620S
SCSI
alpha
1 pass; flatbed scanner
canon
(v1.10)
sane-canon
CanoScan 2700F
SCSI
alpha
1 pass; film scanner
canon
(v1.10)
sane-canon
CanoScan 2710
SCSI
alpha
1 pass; 36bit film scanner
canon
(v1.10)
sane-canon
CanoScan D660U
USB
unsupported
Unsupported. Vendor/product 0x04a9/0x2208. Nothing else is known about these scanners, any information is appreciated.
unsupported (v2003-01-28)
?
CanoScan D1250U2
USB
unsupported
Not supported. However, some information is available.
unsupported (v2003-01-28)
?
CanoScan FB310P
Parport (ECP)
unsupported
Rebadged Avision, different command set
canon_pp
(v0.32)
sane-canon_pp
CanoScan FB320P
Parport (ECP)
alpha
Newly added support
canon_pp
(v0.32)
sane-canon_pp
CanoScan FB330P
Parport (ECP)
beta
canon_pp
(v0.32)
sane-canon_pp
CanoScan FB610P
Parport (ECP)
unsupported
Rebadged Avision, different command set
canon_pp
(v0.32)
sane-canon_pp
CanoScan FB620P
Parport (ECP)
alpha
Newly added support
canon_pp
(v0.32)
sane-canon_pp
CanoScan FB630P
Parport (ECP)
beta
canon_pp
(v0.32)
sane-canon_pp
CanoScan fb630u
USB
beta
OK
canon630u
(v0.1)
sane-canon630u
CanoScan fb636u
USB
untested
hopefully works
canon630u
(v0.1)
sane-canon630u
CanoScan FB1210U
USB
unsupported
Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available.
unsupported (v2003-01-28)
?
CanoScan LiDE20
USB
beta
Poor color picture quality
plustek
(v0.45)
sane-plustek
CanoScan LiDE30
USB
beta
Poor color picture quality
plustek
(v0.45)
sane-plustek
CanoScan N340P
Parport (ECP)
beta
canon_pp
(v0.32)
sane-canon_pp
CanoScan N640P
Parport (ECP)
beta
canon_pp
(v0.32)
sane-canon_pp
CanoScan N640P ex
Parport (ECP)
beta
Just an N640P in a different box?
canon_pp
(v0.32)
sane-canon_pp
CanoScan N650U/N656U
USB
stable
plustek
(v0.45)
sane-plustek
CanoScan N670U/N676U
USB
beta
Poor color picture quality
plustek
(v0.45)
sane-plustek
CanoScan N1220U
USB
beta
Poor color picture quality
plustek
(v0.45)
sane-plustek
CanoScan N1240U
USB
beta
Poor color picture quality
plustek
(v0.45)
sane-plustek
FS4000US
USB SCSI
unsupported
Not supported. USB Vendor/product 0x04a9/0x3042. May work with Vuescan.
unsupported (v2003-01-28)
?
Link(s):
http://www.compaq.com/
Model
Interface
Status
Comment
Backend
Manpage
S200
USB
unsupported
Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00
unsupported (v2003-01-28)
?
Model
Interface
Status
Comment
Backend
Manpage
9352
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
Link(s):
http://www.blackwidow.co.uk/
Model
Interface
Status
Comment
Backend
Manpage
9630S
SCSI
untested
pie
(v1.0)
sane-pie
9636PRO
SCSI
stable
pie
(v1.0)
sane-pie
9636S
SCSI
untested
pie
(v1.0)
sane-pie
Model
Interface
Status
Comment
Backend
Manpage
DF-600P
SCSI
beta
sub model VM3510
teco1
(v1.0-9)
sane-teco1
DF-1200T+
SCSI
untested
sub model VM3530+
teco1
(v1.0-9)
sane-teco1
DF-4830T
SCSI
untested
sub model VM4542
teco1
(v1.0-9)
sane-teco1
DF-9624
SCSI
untested
sub model VM6530+
teco1
(v1.0-9)
sane-teco1
Model
Interface
Status
Comment
Backend
Manpage
KTX-9600US
SCSI
untested
no feedback
umax
(v1.0-37)
sane-umax
Link(s):
http://www.epson.com/
Model
Interface
Status
Comment
Backend
Manpage
Image Scanner 256
SCSI
stable
OK, SCSI-ID=UMAX UG 80
umax
(v1.0-37)
sane-umax
Model
Interface
Status
Comment
Backend
Manpage
Galleria 600
SCSI
untested
untested, SCSI-ID=ESCORT Galleria 600S
umax
(v1.0-37)
sane-umax
Link(s):
http://imagescanner.fujitsu.com/product/index.html , http://www.fujitsu.com/ , http://www.fcpa.fujitsu.com/products/scanners/ , http://www.fujitsu.ca/
Model
Interface
Status
Comment
Backend
Manpage
fi-4010C
USB
unsupported
Unsupported. Vendor/product: 0x04c5, 0x1029. No details about the chipset known until know.
unsupported (v2003-01-28)
?
fi-4110CU
USB
unsupported
Unsupported. No details about the chipset known until know.
unsupported (v2003-01-28)
?
fi-4120C
USB SCSI
unsupported
Unsupported. Vendor/product: 0x04c5/0x1042. No details about the chipset known until know.
unsupported (v2003-01-28)
?
fi-4220C
USB SCSI
unsupported
Unsupported. Vendor/product: 0x04c5/0x1041. No details about the chipset known until know.
unsupported (v2003-01-28)
?
fi-4340C
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M3091DCd
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M3092DCd
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M3093GDim
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M3093GXim
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M3096G
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
M4097
SCSI
beta
fujitsu (v1.0)
sane-fujitsu
ScanPartner
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner 10
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner 10C
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner 15C
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner 300C
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner 600C
SCSI
untested
avision
(vBuild: 55)
sane-avision
ScanPartner Jr
SCSI
untested
avision
(vBuild: 55)
sane-avision
SP15C
SCSI
beta
sp15c (v1.12)
sane-sp15c
Model
Interface
Status
Comment
Backend
Manpage
4800
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
Link(s):
http://www.genius-kye.com/ , http://www.geniusnet.com.tw/ , http://www.genius.kye.de/
Model
Interface
Status
Comment
Backend
Manpage
Colorpage HR6 V2
USB
stable
plustek
(v0.45)
sane-plustek
Colorpage HR6A
USB
untested
plustek
(v0.45)
sane-plustek
Colorpage HR6X
USB
untested
plustek
(v0.45)
sane-plustek
Colorpage HR7
USB
stable
plustek
(v0.45)
sane-plustek
Colorpage HR7LE
USB
untested
plustek
(v0.45)
sane-plustek
Colorpage Vivid III V2
Parport (SPP, EPP)
stable
Reported as PT12
plustek
(v0.45)
sane-plustek
Colorpage Vivid Pro II Film
Parport (SPP, EPP)
stable
Reported as OP9636T/12000T
plustek
(v0.45)
sane-plustek
Colorpage Vivid3x
USB
untested
Should be detected but most probably doesn't work yet. Testers welcome.
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
ColorPage-HR5 (Pro)
SCSI
stable
OK, SCSI-ID=KYE ColorPage-HR5
umax
(v1.0-37)
sane-umax
FS-1130 Colorpage Scanner
SCSI
untested
leo
(v1.0-10)
sane-leo
HR7X Slim
USB
unsupported
Not supported. Is reported to use the GL646 chipset (see link).
unsupported (v2003-01-28)
?
Link(s):
http://www.guillemot.com
Model
Interface
Status
Comment
Backend
Manpage
Maxi Scan A4 Deluxe (SCSI)
SCSI
stable
Seems to be a repackaged SnapScan 310s.
SnapScan
(v1.4)
sane-snapscan
Scan@home Touch 1248 (USB)
USB
stable
Seems to be a repackaged Benq 3300.
SnapScan
(v1.4)
sane-snapscan
Link(s):
http://www.hp.com , http://www.hp.com/
Model
Interface
Status
Comment
Backend
Manpage
PhotoSmart PhotoScanner
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 3c
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 3p
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 4c
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 4p
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 5p
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 5s
Parport (EPP)
alpha
Requires libieee1284 library
hpsj5s
(v0.03)
sane-hpsj5s
ScanJet 2100C
USB
stable
plustek
(v0.45)
sane-plustek
ScanJet 2200C
USB
stable
plustek
(v0.45)
sane-plustek
ScanJet 2300C
USB
unsupported
No chipset information is available.
unsupported (v2003-01-28)
?
Scanjet 3200C
Parport (EPP)
beta
works (relabelled 1220P and 2000P)
umax_pp
(v1)
sane-umax_pp
ScanJet 3500c
USB
unsupported
Unsupported. Seems to use RealTek RTS8801C2-6, see link. Vendor/Product ID 0x03F0/0x2205.
unsupported (v2003-01-28)
?
ScanJet 3530c
USB
unsupported
Unsupported. Chipset and ids unknown, but maybe it's similar to the 3500c?
unsupported (v2003-01-28)
?
ScanJet 3570c
USB
unsupported
Unsupported. Chipset unknown, but maybe it's similar to the 3500c? Has a TA. Vendor/product id 0x03F0/0x2005.
unsupported (v2003-01-28)
?
ScanJet 3570cxi
USB
unsupported
Unsupported. See 3570c.
unsupported (v2003-01-28)
?
ScanJet 4100C
USB
stable
hp
(v1.01)
sane-hp
ScanJet 4400C
USB
unsupported
Not supported. Seems to use the same chip as the 4470C. A stand-alone program for that scanner is available.
unsupported (v2003-01-28)
?
ScanJet 4470C
USB
unsupported
Not supported. However, a stand-alone program is available.
unsupported (v2003-01-28)
?
ScanJet 4570C
USB
unsupported
Not supported. Vendor/product: 0x03f0/0x1305. Not much is known about this scanner. The manual says: 4500c and 5500c series.
unsupported (v2003-01-28)
?
ScanJet 5100C
Parport
stable
Requires ppscsi driver and epst module
hp
(v1.01)
sane-hp
ScanJet 5200C
Parport USB
stable
Parallel interface requires ppscsi driver and epst module
hp
(v1.01)
sane-hp
ScanJet 5300C
USB
stable
avision
(vBuild: 55)
sane-avision
ScanJet 5370C
USB
alpha
avision
(vBuild: 55)
sane-avision
ScanJet 5400C
USB
unsupported
Not supported yet, but in development. A test program is available.
unsupported (v2003-01-28)
?
ScanJet 5470C
USB
unsupported
Not supported yet, but in development. A test program is available.
unsupported (v2003-01-28)
?
ScanJet 5490C
USB
unsupported
Not supported yet, but in development. A test program is available.
unsupported (v2003-01-28)
?
ScanJet 5500C
USB
unsupported
Not supported. Not much is known about this scanner. Same as 4500c series?
unsupported (v2003-01-28)
?
ScanJet 6100C
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet 6200C
SCSI USB
stable
hp
(v1.01)
sane-hp
ScanJet 6250C
SCSI USB
stable
hp
(v1.01)
sane-hp
ScanJet 6300C
SCSI USB
stable
hp
(v1.01)
sane-hp
ScanJet 6350C
SCSI USB
stable
hp
(v1.01)
sane-hp
ScanJet 6390C
SCSI USB
stable
hp
(v1.01)
sane-hp
ScanJet 7400c
USB
alpha
avision
(vBuild: 55)
sane-avision
ScanJet IIc
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet IIcx
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet IIp
SCSI
stable
hp
(v1.01)
sane-hp
ScanJet Plus
Propietary
stable
Driver for HP parallel interface card required
hp
(v1.01)
sane-hp
Link(s):
http://www.komodo.com/
Model
Interface
Status
Comment
Backend
Manpage
S1200
SCSI
untested
rebadged Sceptre S1200
sceptre
(v1.0-10)
sane-sceptre
Model
Interface
Status
Comment
Backend
Manpage
LEOScan S3
SCSI
beta
FCC ID LUZFS1130
leo
(v1.0-10)
sane-leo
Link(s):
http://www.lexmark.com/
Model
Interface
Status
Comment
Backend
Manpage
X70
USB
beta
works, some resolutions fail at 16 bit
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
X73
USB
beta
works, some resolutions fail at 16 bit, same as X70
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Link(s):
http://www.heidelberg.com/
Model
Interface
Status
Comment
Backend
Manpage
Jade
SCSI
stable
OK, SCSI-ID=LinoHell JADE
umax
(v1.0-37)
sane-umax
Jade
SCSI
stable
OK, SCSI-ID=LinoHell Office
umax
(v1.0-37)
sane-umax
Jade2
SCSI
stable
OK, SCSI-ID=LinoHell Office2
umax
(v1.0-37)
sane-umax
Linoscan 1400
SCSI
stable
OK, SCSI-ID=HDM LS4H1S
umax
(v1.0-37)
sane-umax
Opal
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Opal Ultra
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Saphir
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Saphir HiRes
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Saphir Ultra
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Saphir Ultra II
SCSI
untested
support disabled until tested - please contact author
umax
(v1.0-37)
sane-umax
Saphir2
SCSI
stable
OK, SCSI-ID=LinoHell SAPHIR2
umax
(v1.0-37)
sane-umax
Saphir3
SCSI
stable
OK, SCSI-ID=LinoHell SAPHIR3
umax
(v1.0-37)
sane-umax
Link(s):
http://www.medion.de/
Link(s):
http://www.medion.com
Comment: Sold by Aldi and Tchibo
Model
Interface
Status
Comment
Backend
Manpage
LT 9452
USB
beta
Simlar to Mustek ScanExpress 1200 UB Plus
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
MD 9458
USB
beta
Similar to Artec Ultima 2000 (e+?)
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
MD/LT 9375
USB
untested
Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test.
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
MD/LT 9385
USB
beta
Similar to Artec Ultima 2000
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Link(s):
http://www.medion.de/ , http://www.tevion.de/ , http://www.lifetec.de/
Comment: Those scanners are also known as "Aldi Scanner "
Link(s):
http://www.microtek.com/
Link(s):
http://www.minolta.com
Model
Interface
Status
Comment
Backend
Manpage
FS-V1
USB
alpha
avision
(vBuild: 55)
sane-avision
Link(s):
http://www.mitsubishi.com
Link(s):
http://www.mustek.com/ , http://www.mustek.com.tw/ , http://www.mustek.de/
Model
Interface
Status
Comment
Backend
Manpage
600 III EP Plus
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
1200 CP
Parport (EPP)
beta
CIS scanner
mustek_pp
(v12)
sane-mustek_pp
1200 CP+
Parport (EPP)
beta
CIS scanner
mustek_pp
(v12)
sane-mustek_pp
BearPaw 1200
USB
stable
plustek
(v0.45)
sane-plustek
BearPaw 1200 CS
USB
beta
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 1200 CU
USB
beta
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 1200 CU Plus
USB
beta
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 1200 F
USB
unsupported
Not supported. See link for some information.
unsupported (v2003-01-28)
?
BearPaw 1200 TA
USB
beta
Transparency adapter supported
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400
USB
stable
Mostly OK
plustek
(v0.45)
sane-plustek
BearPaw 2400 CS
USB
untested
probably works, reports are welcome
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 CS Plus
USB
untested
probably works, reports are welcome
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 CU
USB
alpha
works, but is slow
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 CU Plus
USB
beta
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 TA
USB
beta
Transparency adapter supported
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 TA Plus
USB
beta
Transparency adapter supported
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
BearPaw 2400 TA Pro
USB
unsupported
Not supported. See link for some information.
unsupported (v2003-01-28)
?
BearPaw 4800 TA Pro
USB
unsupported
Not supported. See link for some information.
unsupported (v2003-01-28)
?
Paragon 600 II CD
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon 600 II ED/EP
Parport
unsupported
Not supported. SCSI over Parport.
unsupported (v2003-01-28)
?
Paragon 600 II N
Proprietary
stable
mustek
(v1.0-130)
sane-mustek
Paragon 800 II SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon 1200 A3 Pro
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon 1200 III SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon 1200 LS
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon 1200 SP Pro
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFC-600S
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFC-800S
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFS-1200SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFS-6000CX
SCSI
stable
3-pass
mustek
(v1.0-130)
sane-mustek
Paragon MFS-6000SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFS-8000SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Paragon MFS-12000CX
SCSI
stable
3-pass
mustek
(v1.0-130)
sane-mustek
Paragon MFS-12000SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanExpress 600 CP
Parport (EPP)
beta
CIS scanner
mustek_pp
(v12)
sane-mustek_pp
ScanExpress 600 CU
USB
stable
mustek_usb
(v1.0-15)
sane-mustek_usb
ScanExpress 600 SEP
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
ScanExpress 1200 CU
USB
stable
mustek_usb
(v1.0-15)
sane-mustek_usb
ScanExpress 1200 CU Plus
USB
stable
mustek_usb
(v1.0-15)
sane-mustek_usb
ScanExpress 1200 UB
USB
stable
For the UB Plus, see gt68xx backend
mustek_usb
(v1.0-15)
sane-mustek_usb
ScanExpress 1200 UB Plus
USB
beta
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
ScanExpress 2400 USB
USB
untested
Should be detected but may need some more work in the code. Testers welcome.
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
ScanExpress 6000 P
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
ScanExpress 6000SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanExpress 12000 P
Parport
unsupported
Not supported. Asic 1505/05.
unsupported (v2003-01-28)
?
ScanExpress 12000SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanExpress 12000SP Plus
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanExpress A3 SP
SCSI
beta
Please test!
mustek
(v1.0-130)
sane-mustek
ScanExpress A3 USB
USB
beta
Works.
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
ScanMagic 600 CP
Parport (EPP)
beta
CIS scanner
mustek_pp
(v12)
sane-mustek_pp
ScanMagic 600 II SP
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanMagic 4800 P
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
ScanMagic 9636S
SCSI
stable
mustek
(v1.0-130)
sane-mustek
ScanMagic 9636S Plus
SCSI
stable
mustek
(v1.0-130)
sane-mustek
Link(s):
http://www.nevt.co.jp/
Model
Interface
Status
Comment
Backend
Manpage
PC-IN500/4C
SCSI
beta
PC-IN500/4C was sold only in JAPAN
nec
(v0.12)
sane-nec
Link(s):
http://www.nikon.com/
Model
Interface
Status
Comment
Backend
Manpage
Diamond 1200
USB
beta
similar to Mustek BearPaw 1200 Plus
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Link(s):
http://www.panasonic.com/
Link(s):
http://www.scanace.com/
Link(s):
http://www.image-land.com/
Model
Interface
Status
Comment
Backend
Manpage
Splendeur 3024
SCSI
beta
sub model VM3552
teco3
(v1.0-1)
sane-teco3
Link(s):
http://www.plustek.com/ , http://www.plustek.de/
Model
Interface
Status
Comment
Backend
Manpage
OpticPro 600P/6000P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 1212U
USB
unsupported
Chipset unknown
unsupported (v2003-01-28)
?
OpticPro 1236P
Parport (SPP, EPP)
stable
reported as OpticPro 12000P/96000P
plustek
(v0.45)
sane-plustek
OpticPro 1248U
USB
beta
Works up to 600 dpi
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
OpticPro 2400SP
SCSI
untested
sub model VM3552
teco3
(v1.0-1)
sane-teco3
OpticPro 4800P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 4830P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 4831P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 9600P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 9630P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 9630PL
Parport (SPP, EPP)
stable
use driver-switch mov=1
plustek
(v0.45)
sane-plustek
OpticPro 9636P
Parport (SPP, EPP)
stable
use driver-switch mov=4
plustek
(v0.45)
sane-plustek
OpticPro 9636P+/Turbo
Parport (SPP, EPP)
stable
use driver-switch mov=3
plustek
(v0.45)
sane-plustek
OpticPro 9636T
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 12000P/96000P
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 12000T
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro 19200S
SCSI
stable
rebadged Artec AM12S
artec
(v0.5.16)
sane-artec
OpticPro A3U
USB
unsupported
Uses Plustek ASIC P99002
unsupported (v2003-01-28)
?
OpticPro AI3
Parport (SPP, EPP)
beta
use driver-switch mov=5, poor picture quality
plustek
(v0.45)
sane-plustek
OpticPro P8
Parport
untested
plustek
(v0.45)
sane-plustek
OpticPro P12
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro PT12
Parport (SPP, EPP)
stable
plustek
(v0.45)
sane-plustek
OpticPro S6
USB
unsupported
Uses RealTek chipset (RTL8801D)
unsupported (v2003-01-28)
?
OpticPro S12
USB
unsupported
Uses the Genesys Logic GL646 chipset.
unsupported (v2003-01-28)
?
OpticPro S24
USB
unsupported
Uses the Genesys Logic GL646 chipset.
unsupported (v2003-01-28)
?
OpticPro U12
USB
stable
NOTE: Devices with product ID 0x0001 are not supported!
plustek
(v0.45)
sane-plustek
OpticPro U12/UT12
USB
unsupported
All devices using product ID 0x0001 are not supported, for others see Plustek backend.
unsupported (v2003-01-28)
?
OpticPro U24
USB
stable
plustek
(v0.45)
sane-plustek
OpticPro UT12
USB
stable
Note: Devices with product ID 0x0001 are not supported!
plustek
(v0.45)
sane-plustek
OpticPro UT16
USB
stable
plustek
(v0.45)
sane-plustek
OpticPro UT16B
USB
untested
Isn't detected yet but may work some time in future. Testers welcome.
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
OpticPro UT24
USB
stable
plustek
(v0.45)
sane-plustek
Link(s):
http://www.primax.nl/
Model
Interface
Status
Comment
Backend
Manpage
Colorado 4800
Parport (SPP, EPP)
untested
same as OpticPro 4800P
plustek
(v0.45)
sane-plustek
Colorado Direct 600
Parport
unsupported
Not supported. However, a stand-alone program is available.
unsupported (v2003-01-28)
?
Colorado Direct 9600
Parport
unsupported
Not supported. However, a stand-alone program is available.
unsupported (v2003-01-28)
?
Compact 4800 Direct
Parport (SPP, EPP)
stable
use driver-switch mov=2
plustek
(v0.45)
sane-plustek
Compact 4800 Direct-30
Parport (SPP, EPP)
untested
same as OpticPro 4830P
plustek
(v0.45)
sane-plustek
Compact 4800 SCSI
SCSI
untested
Probably Mustek 600 II CD compatible
mustek
(v1.0-130)
sane-mustek
Compact 9600 Direct-30
Parport (SPP, EPP)
stable
same as OpticPro 9630P
plustek
(v0.45)
sane-plustek
JEWEL 4800
SCSI
unsupported
Not supported. However, a patch for the teco2 backend and some information is available. Model VM3564.
unsupported (v2003-01-28)
?
Primascan Colorado 2600u
USB
unsupported
See Visioneer Primascan Colorado 2600u.
unsupported (v2003-01-28)
?
Profi 9600
SCSI
alpha
sub model VM6575
teco2
(v1.0-3)
sane-teco2
Profi 19200
SCSI
beta
sub model VM6586
teco2
(v1.0-3)
sane-teco2
Link(s):
http://www.fida.com/
Model
Interface
Status
Comment
Backend
Manpage
Winscan Pro 2448U
USB
unsupported
Not supported. Some information is available. Vendor=0x06dc product=0x0014. Is reported to use an RealTek RTS8801 chipset.
unsupported (v2003-01-28)
?
Link(s):
http://www.relisys.com/ , http://www.tecoimage.com.tw/
Model
Interface
Status
Comment
Backend
Manpage
APOLLO Express 6
SCSI
beta
sub model VM6565
teco2
(v1.0-3)
sane-teco2
AVEC 2400
SCSI
stable
sub model VM3520
teco1
(v1.0-9)
sane-teco1
AVEC 2412
SCSI
untested
sub model VM3520+
teco1
(v1.0-9)
sane-teco1
AVEC 4800
SCSI
untested
sub model VM4530
teco1
(v1.0-9)
sane-teco1
AVEC 4816
SCSI
untested
sub model VM4530+
teco1
(v1.0-9)
sane-teco1
AVEC II S3
SCSI
unsupported
Not supported. However, a patch for the teco2 backend and some information is available. Model VM3564.
unsupported (v2003-01-28)
?
AVEC Super 3
SCSI
untested
sub model VM3575
teco2
(v1.0-3)
sane-teco2
Infinity Scorpio
SCSI
beta
sub model VM3552
teco3
(v1.0-1)
sane-teco3
RELI 2400
SCSI
untested
sub model VM3530
teco1
(v1.0-9)
sane-teco1
RELI 2412
SCSI
stable
sub model VM3530+
teco1
(v1.0-9)
sane-teco1
RELI 4816
SCSI
untested
sub model VM4540
teco1
(v1.0-9)
sane-teco1
RELI 4830
SCSI
beta
sub model VM4542
teco1
(v1.0-9)
sane-teco1
RELI 9600
SCSI
untested
sub model VM6530
teco1
(v1.0-9)
sane-teco1
RELI 9612
SCSI
untested
sub model VM6530*
teco1
(v1.0-9)
sane-teco1
RELI 9624
SCSI
untested
sub model VM6530+
teco1
(v1.0-9)
sane-teco1
RELI 9630
SCSI
untested
sub model VM6540
teco1
(v1.0-9)
sane-teco1
RELI DS6
SCSI
untested
sub model VM3420
teco1
(v1.0-9)
sane-teco1
RELI DS15
SCSI
untested
sub model VM3440
teco1
(v1.0-9)
sane-teco1
SCORPIO Pro
SCSI
beta
sub model VM6575
teco2
(v1.0-3)
sane-teco2
SCORPIO Pro-S
SCSI
untested
sub model VM6586
teco2
(v1.0-3)
sane-teco2
SCORPIO Super 3
SCSI
alpha
sub model VM3575
teco2
(v1.0-3)
sane-teco2
Link(s):
http://www.ricoh.com/
Model
Interface
Status
Comment
Backend
Manpage
Ricoh IS50
SCSI
alpha
ricoh
sane-ricoh
Ricoh IS60
SCSI
alpha
ricoh
sane-ricoh
Link(s):
http://www.scanport.com/
Link(s):
http://www.sceptre.com/
Model
Interface
Status
Comment
Backend
Manpage
Vividscan S1200
SCSI
beta
sceptre
(v1.0-10)
sane-sceptre
Link(s):
http://sharp-world.com/
Link(s):
http://www.siemens.com/ , http://www.siemens.de/
Link(s):
http://www.tamarack.net/
Model
Interface
Status
Comment
Backend
Manpage
Artiscan 6000C
SCSI
beta
3 pass, 300 DPI
tamarack (v0.5)
sane-tamarack
Artiscan 8000C
SCSI
beta
3 pass, 400 DPI
tamarack (v0.5)
sane-tamarack
Artiscan 12000C
SCSI
beta
3 pass, 600 DPI
tamarack (v0.5)
sane-tamarack
Link(s):
http://www.trust-site.com
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.
Model
Interface
Status
Comment
Backend
Manpage
Compact Scan USB 19200
USB
stable
Mustek 1200 UB compatible
mustek_usb
(v1.0-15)
sane-mustek_usb
Compact Scan USB 19200
USB
beta
works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Easy Webscan 19200
USB
alpha
Different product id: 0x4006; modify artec_eplus48u.conf, if the scanner isn't detected
artec_eplus48u
(v0.0.10, NEW! )
sane-artec_eplus48u
Flat Scan USB 19200
USB
beta
Similar to Artec Ultima 2000
gt68xx
(v1.0-37, NEW! )
sane-gt68xx
Imagery 1200
SCSI
stable
3-pass, Mustek Paragon MFS-6000CX compatible
mustek
(v1.0-130)
sane-mustek
Imagery 1200 SP
SCSI
stable
Mustek Paragon MFS-6000SP compatible
mustek
(v1.0-130)
sane-mustek
Imagery 2400 SP
SCSI
beta
sub model VM3552
teco3
(v1.0-1)
sane-teco3
Imagery 4800 SP
SCSI
stable
Mustek Paragon 500 II CD compatible
mustek
(v1.0-130)
sane-mustek
Imagery 4800 SP+
SCSI
beta
sub model VM3552
teco3
(v1.0-1)
sane-teco3
Imagery 9600 SP
SCSI
untested
sub model VM3552
teco3
(v1.0-1)
sane-teco3
SCSI Connect 19200
SCSI
stable
Mustek ScanExpress 12000SP compatible
mustek
(v1.0-130)
sane-mustek
SCSI excellence series 19200
SCSI
stable
Mustek ScanExpress 12000SP compatible
mustek
(v1.0-130)
sane-mustek
Link(s):
http://www.umax.com/ , http://www.umax.com.tw/ , http://www.umax.de/en , http://www.umax-europe.com , http://www.umaxjapan.co.jp , http://www.umax.com.cn
Model
Interface
Status
Comment
Backend
Manpage
Astra 600S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 610P
Parport (EPP)
unsupported
don't work (yet)
umax_pp
(v1)
sane-umax_pp
Astra 610S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 1200S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 1220P
Parport (EPP)
beta
works
umax_pp
(v1)
sane-umax_pp
Astra 1220S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 1220U
USB
stable
OK
umax1220u
(v1.0.1)
sane-umax1220u
Astra 1600P
Parport (EPP)
beta
works
umax_pp
(v1)
sane-umax_pp
Astra 2000P
Parport (EPP)
beta
works
umax_pp
(v1)
sane-umax_pp
Astra 2000U
USB
beta
Sort of scans, but colors all messed up.
umax1220u
(v1.0.1)
sane-umax1220u
Astra 2100S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 2200 (SU)
USB
stable
OK, needs USB control messages
umax
(v1.0-37)
sane-umax
Astra 2200 (SU)
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 2200U
USB
unsupported
Incompatible.
umax1220u
(v1.0.1)
sane-umax1220u
Astra 2400S
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Astra 4500
USB
unsupported
Not supported. Is reported to use GeneScan II GL646 chipset.
unsupported (v2003-01-28)
?
Astra 6400
IEEE-1394
unsupported
will propably work one day
umax
(v1.0-37)
sane-umax
Astra 6450
IEEE-1394
unsupported
will propably work one day
umax
(v1.0-37)
sane-umax
Astra MX3
USB
stable
OK, needs USB control messages
umax
(v1.0-37)
sane-umax
Astra MX3
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Gemini D-16
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Mirage D-16L
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Mirage II
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Mirage IIse
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
PL-II
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
PowerLook
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
PowerLook 270
SCSI
unsupported
incompatible
umax
(v1.0-37)
sane-umax
PowerLook 270plus
SCSI
unsupported
incompatible
umax
(v1.0-37)
sane-umax
PowerLook 1100
IEEE-1394
unsupported
will propably work one day
umax
(v1.0-37)
sane-umax
PowerLook 2000
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
PowerLook 2100XL
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
PowerLook 3000
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
PowerLook III
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
PSD
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Supervista S-12
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UC 630
SCSI
stable
Version 2.8 OK, others only lineart OK
umax
(v1.0-37)
sane-umax
UC 840
SCSI
stable
Version 1.6 OK, others only lineart OK
umax
(v1.0-37)
sane-umax
UC 1200S
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
UC 1200SE
SCSI
stable
Version 3.0 OK, others unknown
umax
(v1.0-37)
sane-umax
UC 1260
SCSI
stable
Version 1.6 OK, others unknown
umax
(v1.0-37)
sane-umax
UG 80
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UG 630
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UMAX 3400
USB
stable
plustek
(v0.45)
sane-plustek
UMAX 5400
USB
untested
plustek
(v0.45)
sane-plustek
UMAX S-6E
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UMAX S-6EG
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UMAX S-12
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UMAX S-12G
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
UMAX VT600
SCSI
untested
may work, please test and give feedback
umax
(v1.0-37)
sane-umax
Vista S6
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Vista S6E
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Vista-S8
SCSI
stable
OK
umax
(v1.0-37)
sane-umax
Vista-T630
SCSI
stable
OK for some firmwareversions, on others only lineart OK
umax
(v1.0-37)
sane-umax
Link(s):
http://www.visioneer.com/
Model
Interface
Status
Comment
Backend
Manpage
6200
USB
unsupported
Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details.
unsupported (v2003-01-28)
?
Onetouch 8920
USB
unsupported
Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. See link for output of /proc/bus/usb/devices.
unsupported (v2003-01-28)
?
Primascan Colorado 2600u
USB
unsupported
Not supported. Chipset unknown, maybe `E1'. Vendor/product 0x0461/0x0347 (Primax!). One bulk-in and one bulk-out ep. See link to usenet posting for some more details.
unsupported (v2003-01-28)
?
Model
Interface
Status
Comment
Backend
Manpage
Compact II
Parport (EPP)
alpha
300 dpi CCD scanner
mustek_pp
(v12)
sane-mustek_pp
Link(s):
http://www.vobis.de/
Model
Interface
Status
Comment
Backend
Manpage
HighScan
SCSI
stable
only E3plus based models
microtek2
(v0.95)
sane-microtek2
Highscreen Scanboostar Premium
SCSI
stable
OK, SCSI-ID=LinoHell Office2
umax
(v1.0-37)
sane-umax
Comment: Company was renamed to Benq .
Manufacturers :
Kodak ,
Polaroid
Link(s):
http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml , http://www.kodak.com/US/en/digital/cameras/DCSGateway.shtml
Link(s):
http://www.polaroid.com/
Model
Interface
Status
Comment
Backend
Manpage
DMC
SCSI
stable
dmc (v1.0)
sane-dmc
Manufacturers :
Connectix
Link(s):
http://www.connectix.com/
Model
Interface
Status
Comment
Backend
Manpage
Color QuickCam
Parport
alpha
Require root privileges.
qcam
sane-qcam
Greyscale QuickCam
Parport
alpha
Require root privileges. Partly working.
qcam
sane-qcam
Backends :
gphoto2 ,
pint ,
pnm ,
test ,
v4l