Whole document tree
PCI-Bus Receiver (6039 GPS/DCF77)
Description
The refclock_hopf_pci driver supports the hopf PCI-bus interface 6039 GPS/DCF77.Additional software and information about the software drivers maybe available from: http://www.ATLSoft.de/ntp.
Latest NTP driver source, executables and documentation is maintained at: http://www.ATLSoft.de/ntp
Operating System Compatibility
The hopf clock driver has been tested on the following software and hardware
platforms:
|
Platform |
Operating System |
|
i386 (PC) |
Linux |
|
i386 (PC) |
Windows NT |
|
i386 (PC) |
Windows 2000 |
O/S System Configuration
UNIX
The driver attempts to open the device /dev/hopf6039 . The device entry will be made by the installation process of the kernel module for the PCI-bus board. The driver sources belongs to the delivery equipment of the PCI-board.Windows NT/2000
The driver attempts to open the device by calling the function "OpenHopfDevice()". This function will be installed by the Device Driver for the PCI-bus board. The driver belongs to the delivery equipment of the PCI-board.
Fudge Factors
- refid string
- Specifies the driver reference identifier, GPS or DCF.
- flag1 0 | 1
- When set to 1, driver sync's even if only crystal driven.
Questions or Comments:
Bernd Altmeier
Ing.-B’ro f’r Software www.ATLSoft.de
(last updated 03/02/2001)