Copyright (C) 2000-2012 |
Whole document tree
14.3.15 Tandem ST2000GDB may be used with a Tandem ST2000 phone switch, running Tandem's STDBUG protocol. To connect your ST2000 to the host system, see the manufacturer's manual. Once the ST2000 is physically attached, you can run:
to establish it as your debugging environment. dev is normally
the name of a serial device, such as `/dev/ttya', connected to the
ST2000 via a serial line. You can instead specify dev as a TCP
connection (for example, to a serial line attached via a terminal
concentrator) using the syntax
The These auxiliary GDB commands are available to help you with the ST2000 environment:
This document was generated by root on January, 30 2002 using texi2html |