Copyright (C) 2000-2012 |
Whole document tree
8.6.2.2 Register NamesYou can use the predefined symbols `r0', `r1', `r2', `r3', `r4', `r5', `r6', and `r7' to refer to the H8/500 registers. The H8/500 also has these control registers:
All registers are 16 bits long. To represent 32 bit numbers, use two
adjacent registers; for distant memory addresses, use one of the segment
pointers ( This document was generated by root on January, 30 2002 using texi2html |