Processes are the primitive units for allocation of system
resources. Each process has its own address space and (usually) one
thread of control. A process executes a program; you can have multiple
processes executing the same program, but each process has its own copy
of the program within its own address space and executes it
independently of the other copies.
Processes are organized hierarchically. Each process has a parent
process which explicitly arranged to create it. The processes created
by a given parent are called its child processes. A child
inherits many of its attributes from the parent process.
This chapter describes how a program can create, terminate, and control
child processes. Actually, there are three distinct operations
involved: creating a new child process, causing the new process to
execute a program, and coordinating the completion of the child process
with the original program.
The system function provides a simple, portable mechanism for
running another program; it does all three steps automatically. If you
need more control over the details of how this is done, you can use the
primitive functions to do each step individually instead.
The easy way to run another program is to use the system
function. This function does all the work of running a subprogram, but
it doesn't give you much control over the details: you have to wait
until the subprogram terminates before you can do anything else.
Function: int system(const char *command)
This function executes command as a shell command. In the GNU C
library, it always uses the default shell sh to run the command.
In particular, it searches the directories in PATH to find
programs to execute. The return value is -1 if it wasn't
possible to create the shell process, and otherwise is the status of the
shell process. See section 26.6 Process Completion, for details on how this
status code can be interpreted.
If the command argument is a null pointer, a return value of zero
indicates that no command processor is available.
This function is a cancellation point in multi-threaded programs. This
is a problem if the thread allocates some resources (like memory, file
descriptors, semaphores or whatever) at the time system is
called. If the thread gets canceled these resources stay allocated
until the program ends. To avoid this calls to system should be
protected using cancellation handlers.
The system function is declared in the header file
`stdlib.h'.
Portability Note: Some C implementations may not have any
notion of a command processor that can execute other programs. You can
determine whether a command processor exists by executing
system (NULL); if the return value is nonzero, a command
processor is available.
The popen and pclose functions (see section 15.2 Pipe to a Subprocess) are closely related to the system function. They
allow the parent process to communicate with the standard input and
output channels of the command being executed.
This section gives an overview of processes and of the steps involved in
creating a process and making it run another program.
Each process is named by a process ID number. A unique process ID
is allocated to each process when it is created. The lifetime of
a process ends when its termination is reported to its parent process;
at that time, all of the process resources, including its process ID,
are freed.
Processes are created with the fork system call (so the operation
of creating a new process is sometimes called forking a process).
The child process created by fork is a copy of the original
parent process, except that it has its own process ID.
After forking a child process, both the parent and child processes
continue to execute normally. If you want your program to wait for a
child process to finish executing before continuing, you must do this
explicitly after the fork operation, by calling wait or
waitpid (see section 26.6 Process Completion). These functions give you
limited information about why the child terminated--for example, its
exit status code.
A newly forked child process continues to execute the same program as
its parent process, at the point where the fork call returns.
You can use the return value from fork to tell whether the program
is running in the parent process or the child.
Having several processes run the same program is only occasionally
useful. But the child can execute another program using one of the
exec functions; see 26.5 Executing a File. The program that the
process is executing is called its process image. Starting
execution of a new program causes the process to forget all about its
previous process image; when the new program exits, the process exits
too, instead of returning to the previous process image.
The pid_t data type represents process IDs. You can get the
process ID of a process by calling getpid. The function
getppid returns the process ID of the parent of the current
process (this is also known as the parent process ID). Your
program should include the header files `unistd.h' and
`sys/types.h' to use these functions.
Data Type:pid_t
The pid_t data type is a signed integer type which is capable
of representing a process ID. In the GNU library, this is an int.
Function: pid_t getpid(void)
The getpid function returns the process ID of the current process.
Function: pid_t getppid(void)
The getppid function returns the process ID of the parent of the
current process.
The fork function is the primitive for creating a process.
It is declared in the header file `unistd.h'.
Function: pid_t fork(void)
The fork function creates a new process.
If the operation is successful, there are then both parent and child
processes and both see fork return, but with different values: it
returns a value of 0 in the child process and returns the child's
process ID in the parent process.
If process creation failed, fork returns a value of -1 in
the parent process. The following errno error conditions are
defined for fork:
EAGAIN
There aren't enough system resources to create another process, or the
user already has too many processes running. This means exceeding the
RLIMIT_NPROC resource limit, which can usually be increased;
see section 22.2 Limiting Resource Usage.
ENOMEM
The process requires more space than the system can supply.
The specific attributes of the child process that differ from the
parent process are:
The child process has its own unique process ID.
The parent process ID of the child process is the process ID of its
parent process.
The child process gets its own copies of the parent process's open file
descriptors. Subsequently changing attributes of the file descriptors
in the parent process won't affect the file descriptors in the child,
and vice versa. See section 13.11 Control Operations on Files. However, the file position
associated with each descriptor is shared by both processes;
see section 11.1.2 File Position.
The child doesn't inherit alarms set by the parent process.
See section 21.5 Setting an Alarm.
The set of pending signals (see section 24.1.3 How Signals Are Delivered) for the child
process is cleared. (The child process inherits its mask of blocked
signals and signal actions from the parent process.)
Function: pid_t vfork(void)
The vfork function is similar to fork but on some systems
it is more efficient; however, there are restrictions you must follow to
use it safely.
While fork makes a complete copy of the calling process's address
space and allows both the parent and child to execute independently,
vfork does not make this copy. Instead, the child process
created with vfork shares its parent's address space until it
calls _exit or one of the exec functions. In the
meantime, the parent process suspends execution.
You must be very careful not to allow the child process created with
vfork to modify any global data or even local variables shared
with the parent. Furthermore, the child process cannot return from (or
do a long jump out of) the function that called vfork! This
would leave the parent process's control information very confused. If
in doubt, use fork instead.
Some operating systems don't really implement vfork. The GNU C
library permits you to use vfork on all systems, but actually
executes fork if vfork isn't available. If you follow
the proper precautions for using vfork, your program will still
work even if the system uses fork instead.
This section describes the exec family of functions, for executing
a file as a process image. You can use these functions to make a child
process execute a new program after it has been forked.
The functions in this family differ in how you specify the arguments,
but otherwise they all do the same thing. They are declared in the
header file `unistd.h'.
Function: int execv(const char *filename, char *const argv[])
The execv function executes the file named by filename as a
new process image.
The argv argument is an array of null-terminated strings that is
used to provide a value for the argv argument to the main
function of the program to be executed. The last element of this array
must be a null pointer. By convention, the first element of this array
is the file name of the program sans directory names. See section 25.1 Program Arguments, for full details on how programs can access these arguments.
The environment for the new process image is taken from the
environ variable of the current process image; see
25.4 Environment Variables, for information about environments.
Function: int execl(const char *filename, const char *arg0, ...)
This is similar to execv, but the argv strings are
specified individually instead of as an array. A null pointer must be
passed as the last such argument.
This is similar to execv, but permits you to specify the environment
for the new program explicitly as the env argument. This should
be an array of strings in the same format as for the environ
variable; see 25.4.1 Environment Access.
This is similar to execl, but permits you to specify the
environment for the new program explicitly. The environment argument is
passed following the null pointer that marks the last argv
argument, and should be an array of strings in the same format as for
the environ variable.
Function: int execvp(const char *filename, char *const argv[])
The execvp function is similar to execv, except that it
searches the directories listed in the PATH environment variable
(see section 25.4.2 Standard Environment Variables) to find the full file name of a
file from filename if filename does not contain a slash.
This function is useful for executing system utility programs, because
it looks for them in the places that the user has chosen. Shells use it
to run the commands that users type.
Function: int execlp(const char *filename, const char *arg0, ...)
This function is like execl, except that it performs the same
file name searching as the execvp function.
The size of the argument list and environment list taken together must
not be greater than ARG_MAX bytes. See section 31.1 General Capacity Limits. In
the GNU system, the size (which compares against ARG_MAX)
includes, for each string, the number of characters in the string, plus
the size of a char *, plus one, rounded up to a multiple of the
size of a char *. Other systems may have somewhat different
rules for counting.
These functions normally don't return, since execution of a new program
causes the currently executing program to go away completely. A value
of -1 is returned in the event of a failure. In addition to the
usual file name errors (see section 11.2.3 File Name Errors), the following
errno error conditions are defined for these functions:
E2BIG
The combined size of the new program's argument list and environment
list is larger than ARG_MAX bytes. The GNU system has no
specific limit on the argument list size, so this error code cannot
result, but you may get ENOMEM instead if the arguments are too
big for available memory.
ENOEXEC
The specified file can't be executed because it isn't in the right format.
ENOMEM
Executing the specified file requires more storage than is available.
If execution of the new file succeeds, it updates the access time field
of the file as if the file had been read. See section 14.9.9 File Times, for more
details about access times of files.
The point at which the file is closed again is not specified, but
is at some point before the process exits or before another process
image is executed.
Executing a new process image completely changes the contents of memory,
copying only the argument and environment strings to new locations. But
many other attributes of the process are unchanged:
Current working directory and root directory. See section 14.1 Working Directory. In the GNU system, the root directory is not copied when
executing a setuid program; instead the system default root directory
is used for the new program.
If the set-user-ID and set-group-ID mode bits of the process image file
are set, this affects the effective user ID and effective group ID
(respectively) of the process. These concepts are discussed in detail
in 29.2 The Persona of a Process.
Signals that are set to be ignored in the existing process image are
also set to be ignored in the new process image. All other signals are
set to the default action in the new process image. For more
information about signals, see 24. Signal Handling.
File descriptors open in the existing process image remain open in the
new process image, unless they have the FD_CLOEXEC
(close-on-exec) flag set. The files that remain open inherit all
attributes of the open file description from the existing process image,
including file locks. File descriptors are discussed in 13. Low-Level Input/Output.
Streams, by contrast, cannot survive through exec functions,
because they are located in the memory of the process itself. The new
process image has no streams except those it creates afresh. Each of
the streams in the pre-exec process image has a descriptor inside
it, and these descriptors do survive through exec (provided that
they do not have FD_CLOEXEC set). The new process image can
reconnect these to new streams using fdopen (see section 13.4 Descriptors and Streams).
The functions described in this section are used to wait for a child
process to terminate or stop, and determine its status. These functions
are declared in the header file `sys/wait.h'.
Function: pid_t waitpid(pid_t pid, int *status-ptr, int options)
The waitpid function is used to request status information from a
child process whose process ID is pid. Normally, the calling
process is suspended until the child process makes status information
available by terminating.
Other values for the pid argument have special interpretations. A
value of -1 or WAIT_ANY requests status information for
any child process; a value of 0 or WAIT_MYPGRP requests
information for any child process in the same process group as the
calling process; and any other negative value - pgid
requests information for any child process whose process group ID is
pgid.
If status information for a child process is available immediately, this
function returns immediately without waiting. If more than one eligible
child process has status information available, one of them is chosen
randomly, and its status is returned immediately. To get the status
from the other eligible child processes, you need to call waitpid
again.
The options argument is a bit mask. Its value should be the
bitwise OR (that is, the `|' operator) of zero or more of the
WNOHANG and WUNTRACED flags. You can use the
WNOHANG flag to indicate that the parent process shouldn't wait;
and the WUNTRACED flag to request status information from stopped
processes as well as processes that have terminated.
The status information from the child process is stored in the object
that status-ptr points to, unless status-ptr is a null pointer.
This function is a cancellation point in multi-threaded programs. This
is a problem if the thread allocates some resources (like memory, file
descriptors, semaphores or whatever) at the time waitpid is
called. If the thread gets canceled these resources stay allocated
until the program ends. To avoid this calls to waitpid should be
protected using cancellation handlers.
The return value is normally the process ID of the child process whose
status is reported. If there are child processes but none of them is
waiting to be noticed, waitpid will block until one is. However,
if the WNOHANG option was specified, waitpid will return
zero instead of blocking.
If a specific PID to wait for was given to waitpid, it will
ignore all other children (if any). Therefore if there are children
waiting to be noticed but the child whose PID was specified is not one
of them, waitpid will block or return zero as described above.
A value of -1 is returned in case of error. The following
errno error conditions are defined for this function:
There are no child processes to wait for, or the specified pid
is not a child of the calling process.
EINVAL
An invalid value was provided for the options argument.
These symbolic constants are defined as values for the pid argument
to the waitpid function.
WAIT_ANY
This constant macro (whose value is -1) specifies that
waitpid should return status information about any child process.
WAIT_MYPGRP
This constant (with value 0) specifies that waitpid should
return status information about any child process in the same process
group as the calling process.
These symbolic constants are defined as flags for the options
argument to the waitpid function. You can bitwise-OR the flags
together to obtain a value to use as the argument.
WNOHANG
This flag specifies that waitpid should return immediately
instead of waiting, if there is no child process ready to be noticed.
WUNTRACED
This flag specifies that waitpid should report the status of any
child processes that have been stopped as well as those that have
terminated.
Function: pid_t wait(int *status-ptr)
This is a simplified version of waitpid, and is used to wait
until any one child process terminates. The call:
wait (&status)
is exactly equivalent to:
waitpid (-1, &status, 0)
This function is a cancellation point in multi-threaded programs. This
is a problem if the thread allocates some resources (like memory, file
descriptors, semaphores or whatever) at the time wait is
called. If the thread gets canceled these resources stay allocated
until the program ends. To avoid this calls to wait should be
protected using cancellation handlers.
Function: pid_t wait4(pid_t pid, int *status-ptr, int options, struct rusage *usage)
If usage is a null pointer, wait4 is equivalent to
waitpid (pid, status-ptr, options).
If usage is not null, wait4 stores usage figures for the
child process in *rusage (but only if the child has
terminated, not if it has stopped). See section 22.1 Resource Usage.
This function is a BSD extension.
Here's an example of how to use waitpid to get the status from
all child processes that have terminated, without ever waiting. This
function is designed to be a handler for SIGCHLD, the signal that
indicates that at least one child process has terminated.
If the exit status value (see section 25.6 Program Termination) of the child
process is zero, then the status value reported by waitpid or
wait is also zero. You can test for other kinds of information
encoded in the returned status value using the following macros.
These macros are defined in the header file `sys/wait.h'.
Macro: int WIFEXITED(int status)
This macro returns a nonzero value if the child process terminated
normally with exit or _exit.
Macro: int WEXITSTATUS(int status)
If WIFEXITED is true of status, this macro returns the
low-order 8 bits of the exit status value from the child process.
See section 25.6.2 Exit Status.
Macro: int WIFSIGNALED(int status)
This macro returns a nonzero value if the child process terminated
because it received a signal that was not handled.
See section 24. Signal Handling.
Macro: int WTERMSIG(int status)
If WIFSIGNALED is true of status, this macro returns the
signal number of the signal that terminated the child process.
Macro: int WCOREDUMP(int status)
This macro returns a nonzero value if the child process terminated
and produced a core dump.
Macro: int WIFSTOPPED(int status)
This macro returns a nonzero value if the child process is stopped.
Macro: int WSTOPSIG(int status)
If WIFSTOPPED is true of status, this macro returns the
signal number of the signal that caused the child process to stop.
The GNU library also provides these related facilities for compatibility
with BSD Unix. BSD uses the union wait data type to represent
status values rather than an int. The two representations are
actually interchangeable; they describe the same bit patterns. The GNU
C Library defines macros such as WEXITSTATUS so that they will
work on either kind of object, and the wait function is defined
to accept either type of pointer as its status-ptr argument.
These functions are declared in `sys/wait.h'.
Data Type:union wait
This data type represents program termination status values. It has
the following members:
int w_termsig
The value of this member is the same as that of the
WTERMSIG macro.
int w_coredump
The value of this member is the same as that of the
WCOREDUMP macro.
int w_retcode
The value of this member is the same as that of the
WEXITSTATUS macro.
int w_stopsig
The value of this member is the same as that of the
WSTOPSIG macro.
Instead of accessing these members directly, you should use the
equivalent macros.
The wait3 function is the predecessor to wait4, which is
more flexible. wait3 is now obsolete.
Function: pid_t wait3(union wait *status-ptr, int options, struct rusage *usage)
If usage is a null pointer, wait3 is equivalent to
waitpid (-1, status-ptr, options).
If usage is not null, wait3 stores usage figures for the
child process in *rusage (but only if the child has
terminated, not if it has stopped). See section 22.1 Resource Usage.
Here is an example program showing how you might write a function
similar to the built-in system. It executes its command
argument using the equivalent of `sh -c command'.
#include <stddef.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
/* Execute the command using this shell program. */
#define SHELL "/bin/sh"
int
my_system (const char *command)
{
int status;
pid_t pid;
pid = fork ();
if (pid == 0)
{
/* This is the child process. Execute the shell command. */
execl (SHELL, SHELL, "-c", command, NULL);
_exit (EXIT_FAILURE);
}
else if (pid < 0)
/* The fork failed. Report failure. */
status = -1;
else
/* This is the parent process. Wait for the child to complete. */
if (waitpid (pid, &status, 0) != pid)
status = -1;
return status;
}
There are a couple of things you should pay attention to in this
example.
Remember that the first argv argument supplied to the program
represents the name of the program being executed. That is why, in the
call to execl, SHELL is supplied once to name the program
to execute and a second time to supply a value for argv[0].
The execl call in the child process doesn't return if it is
successful. If it fails, you must do something to make the child
process terminate. Just returning a bad status code with return
would leave two processes running the original program. Instead, the
right behavior is for the child process to report failure to its parent
process.
Call _exit to accomplish this. The reason for using _exit
instead of exit is to avoid flushing fully buffered streams such
as stdout. The buffers of these streams probably contain data
that was copied from the parent process by the fork, data that
will be output eventually by the parent process. Calling exit in
the child would output the data twice. See section 25.6.5 Termination Internals.