Whole document tree
    

Whole document tree

Using as: D10V-Regs
[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

8.4.2.4 Register Names

You can use the predefined symbols `r0' through `r15' to refer to the D10V registers. You can also use `sp' as an alias for `r15'. The accumulators are `a0' and `a1'. There are special register-pair names that may optionally be used in opcodes that require even-numbered registers. Register names are not case sensitive.

Register Pairs

r0-r1
r2-r3
r4-r5
r6-r7
r8-r9
r10-r11
r12-r13
r14-r15

The D10V also has predefined symbols for these control registers and status bits:

psw
Processor Status Word
bpsw
Backup Processor Status Word
pc
Program Counter
bpc
Backup Program Counter
rpt_c
Repeat Count
rpt_s
Repeat Start address
rpt_e
Repeat End address
mod_s
Modulo Start address
mod_e
Modulo End address
iba
Instruction Break Address
f0
Flag 0
f1
Flag 1
c
Carry flag


This document was generated by root on January, 30 2002 using texi2html