Many functions in the GNU C library detect and report error conditions,
and sometimes your programs need to check for these error conditions.
For example, when you open an input file, you should verify that the
file was actually opened correctly, and print an error message or take
other appropriate action if the call to the library function failed.
This chapter describes how the error reporting facility works. Your
program should include the header file `errno.h' to use this
facility.
Most library functions return a special value to indicate that they have
failed. The special value is typically -1, a null pointer, or a
constant such as EOF that is defined for that purpose. But this
return value tells you only that an error has occurred. To find out
what kind of error it was, you need to look at the error code stored in the
variable errno. This variable is declared in the header file
`errno.h'.
Variable: volatile int errno
The variable errno contains the system error number. You can
change the value of errno.
Since errno is declared volatile, it might be changed
asynchronously by a signal handler; see 24.4 Defining Signal Handlers.
However, a properly written signal handler saves and restores the value
of errno, so you generally do not need to worry about this
possibility except when writing signal handlers.
The initial value of errno at program startup is zero. Many
library functions are guaranteed to set it to certain nonzero values
when they encounter certain kinds of errors. These error conditions are
listed for each function. These functions do not change errno
when they succeed; thus, the value of errno after a successful
call is not necessarily zero, and you should not use errno to
determine whether a call failed. The proper way to do that is
documented for each function. If the call failed, you can
examine errno.
Many library functions can set errno to a nonzero value as a
result of calling other library functions which might fail. You should
assume that any library function might alter errno when the
function returns an error.
Portability Note: ISO C specifies errno as a
"modifiable lvalue" rather than as a variable, permitting it to be
implemented as a macro. For example, its expansion might involve a
function call, like *_errno (). In fact, that is what it is
on the GNU system itself. The GNU library, on non-GNU systems, does
whatever is right for the particular system.
There are a few library functions, like sqrt and atan,
that return a perfectly legitimate value in case of an error, but also
set errno. For these functions, if you want to check to see
whether an error occurred, the recommended method is to set errno
to zero before calling the function, and then check its value afterward.
All the error codes have symbolic names; they are macros defined in
`errno.h'. The names start with `E' and an upper-case
letter or digit; you should consider names of this form to be
reserved names. See section 1.3.3 Reserved Names.
The error code values are all positive integers and are all distinct,
with one exception: EWOULDBLOCK and EAGAIN are the same.
Since the values are distinct, you can use them as labels in a
switch statement; just don't use both EWOULDBLOCK and
EAGAIN. Your program should not make any other assumptions about
the specific values of these symbolic constants.
The value of errno doesn't necessarily have to correspond to any
of these macros, since some library functions might return other error
codes of their own for other situations. The only values that are
guaranteed to be meaningful for a particular library function are the
ones that this manual lists for that function.
On non-GNU systems, almost any system call can return EFAULT if
it is given an invalid pointer as an argument. Since this could only
happen as a result of a bug in your program, and since it will not
happen on the GNU system, we have saved space by not mentioning
EFAULT in the descriptions of individual functions.
In some Unix systems, many system calls can also return EFAULT if
given as an argument a pointer into the stack, and the kernel for some
obscure reason fails in its attempt to extend the stack. If this ever
happens, you should probably try using statically or dynamically
allocated memory instead of stack memory on that system.
The error code macros are defined in the header file `errno.h'.
All of them expand into integer constant values. Some of these error
codes can't occur on the GNU system, but they can occur using the GNU
library on other systems.
Macro: int EPERM
Operation not permitted; only the owner of the file (or other resource)
or processes with special privileges can perform the operation.
Macro: int ENOENT
No such file or directory. This is a "file doesn't exist" error
for ordinary files that are referenced in contexts where they are
expected to already exist.
Macro: int ESRCH
No process matches the specified process ID.
Macro: int EINTR
Interrupted function call; an asynchronous signal occurred and prevented
completion of the call. When this happens, you should try the call
again.
Input/output error; usually used for physical read or write errors.
Macro: int ENXIO
No such device or address. The system tried to use the device
represented by a file you specified, and it couldn't find the device.
This can mean that the device file was installed incorrectly, or that
the physical device is missing or not correctly attached to the
computer.
Macro: int E2BIG
Argument list too long; used when the arguments passed to a new program
being executed with one of the exec functions (see section 26.5 Executing a File) occupy too much memory space. This condition never arises in the
GNU system.
Macro: int ENOEXEC
Invalid executable file format. This condition is detected by the
exec functions; see 26.5 Executing a File.
Macro: int EBADF
Bad file descriptor; for example, I/O on a descriptor that has been
closed or reading from a descriptor open only for writing (or vice
versa).
Macro: int ECHILD
There are no child processes. This error happens on operations that are
supposed to manipulate child processes, when there aren't any processes
to manipulate.
Macro: int EDEADLK
Deadlock avoided; allocating a system resource would have resulted in a
deadlock situation. The system does not guarantee that it will notice
all such situations. This error means you got lucky and the system
noticed; it might just hang. See section 13.15 File Locks, for an example.
Macro: int ENOMEM
No memory available. The system cannot allocate more virtual memory
because its capacity is full.
Macro: int EACCES
Permission denied; the file permissions do not allow the attempted operation.
Macro: int EFAULT
Bad address; an invalid pointer was detected.
In the GNU system, this error never happens; you get a signal instead.
Macro: int ENOTBLK
A file that isn't a block special file was given in a situation that
requires one. For example, trying to mount an ordinary file as a file
system in Unix gives this error.
Macro: int EBUSY
Resource busy; a system resource that can't be shared is already in use.
For example, if you try to delete a file that is the root of a currently
mounted filesystem, you get this error.
Macro: int EEXIST
File exists; an existing file was specified in a context where it only
makes sense to specify a new file.
Macro: int EXDEV
An attempt to make an improper link across file systems was detected.
This happens not only when you use link (see section 14.4 Hard Links) but
also when you rename a file with rename (see section 14.7 Renaming Files).
Macro: int ENODEV
The wrong type of device was given to a function that expects a
particular sort of device.
Macro: int ENOTDIR
A file that isn't a directory was specified when a directory is required.
Macro: int EISDIR
File is a directory; you cannot open a directory for writing,
or create or remove hard links to it.
Macro: int EINVAL
Invalid argument. This is used to indicate various kinds of problems
with passing the wrong argument to a library function.
Macro: int EMFILE
The current process has too many files open and can't open any more.
Duplicate descriptors do count toward this limit.
In BSD and GNU, the number of open files is controlled by a resource
limit that can usually be increased. If you get this error, you might
want to increase the RLIMIT_NOFILE limit or make it unlimited;
see section 22.2 Limiting Resource Usage.
Macro: int ENFILE
There are too many distinct file openings in the entire system. Note
that any number of linked channels count as just one file opening; see
13.5.1 Linked Channels. This error never occurs in the GNU system.
Macro: int ENOTTY
Inappropriate I/O control operation, such as trying to set terminal
modes on an ordinary file.
Macro: int ETXTBSY
An attempt to execute a file that is currently open for writing, or
write to a file that is currently being executed. Often using a
debugger to run a program is considered having it open for writing and
will cause this error. (The name stands for "text file busy".) This
is not an error in the GNU system; the text is copied as necessary.
Macro: int EFBIG
File too big; the size of a file would be larger than allowed by the system.
Macro: int ENOSPC
No space left on device; write operation on a file failed because the
disk is full.
Macro: int ESPIPE
Invalid seek operation (such as on a pipe).
Macro: int EROFS
An attempt was made to modify something on a read-only file system.
Macro: int EMLINK
Too many links; the link count of a single file would become too large.
rename can cause this error if the file being renamed already has
as many links as it can take (see section 14.7 Renaming Files).
Macro: int EPIPE
Broken pipe; there is no process reading from the other end of a pipe.
Every library function that returns this error code also generates a
SIGPIPE signal; this signal terminates the program if not handled
or blocked. Thus, your program will never actually see EPIPE
unless it has handled or blocked SIGPIPE.
Macro: int EDOM
Domain error; used by mathematical functions when an argument value does
not fall into the domain over which the function is defined.
Macro: int ERANGE
Range error; used by mathematical functions when the result value is
not representable because of overflow or underflow.
Macro: int EAGAIN
Resource temporarily unavailable; the call might work if you try again
later. The macro EWOULDBLOCK is another name for EAGAIN;
they are always the same in the GNU C library.
This error can happen in a few different situations:
An operation that would block was attempted on an object that has
non-blocking mode selected. Trying the same operation again will block
until some external condition makes it possible to read, write, or
connect (whatever the operation). You can use select to find out
when the operation will be possible; see section 13.8 Waiting for Input or Output.
Portability Note: In many older Unix systems, this condition
was indicated by EWOULDBLOCK, which was a distinct error code
different from EAGAIN. To make your program portable, you should
check for both codes and treat them the same.
A temporary resource shortage made an operation impossible. fork
can return this error. It indicates that the shortage is expected to
pass, so your program can try the call again later and it may succeed.
It is probably a good idea to delay for a few seconds before trying it
again, to allow time for other processes to release scarce resources.
Such shortages are usually fairly serious and affect the whole system,
so usually an interactive program should report the error to the user
and return to its command loop.
Macro: int EWOULDBLOCK
In the GNU C library, this is another name for EAGAIN (above).
The values are always the same, on every operating system.
C libraries in many older Unix systems have EWOULDBLOCK as a
separate error code.
Macro: int EINPROGRESS
An operation that cannot complete immediately was initiated on an object
that has non-blocking mode selected. Some functions that must always
block (such as connect; see section 16.9.1 Making a Connection) never return
EAGAIN. Instead, they return EINPROGRESS to indicate that
the operation has begun and will take some time. Attempts to manipulate
the object before the call completes return EALREADY. You can
use the select function to find out when the pending operation
has completed; see section 13.8 Waiting for Input or Output.
Macro: int EALREADY
An operation is already in progress on an object that has non-blocking
mode selected.
Macro: int ENOTSOCK
A file that isn't a socket was specified when a socket is required.
Macro: int EMSGSIZE
The size of a message sent on a socket was larger than the supported
maximum size.
Macro: int EPROTOTYPE
The socket type does not support the requested communications protocol.
Macro: int ENOPROTOOPT
You specified a socket option that doesn't make sense for the
particular protocol being used by the socket. See section 16.12 Socket Options.
Macro: int EPROTONOSUPPORT
The socket domain does not support the requested communications protocol
(perhaps because the requested protocol is completely invalid).
See section 16.8.1 Creating a Socket.
Macro: int ESOCKTNOSUPPORT
The socket type is not supported.
Macro: int EOPNOTSUPP
The operation you requested is not supported. Some socket functions
don't make sense for all types of sockets, and others may not be
implemented for all communications protocols. In the GNU system, this
error can happen for many calls when the object does not support the
particular operation; it is a generic indication that the server knows
nothing to do for that call.
Macro: int EPFNOSUPPORT
The socket communications protocol family you requested is not supported.
Macro: int EAFNOSUPPORT
The address family specified for a socket is not supported; it is
inconsistent with the protocol being used on the socket. See section 16. Sockets.
The requested socket address is not available; for example, you tried
to give a socket a name that doesn't match the local host name.
See section 16.3 Socket Addresses.
Macro: int ENETDOWN
A socket operation failed because the network was down.
Macro: int ENETUNREACH
A socket operation failed because the subnet containing the remote host
was unreachable.
Macro: int ENETRESET
A network connection was reset because the remote host crashed.
Macro: int ECONNABORTED
A network connection was aborted locally.
Macro: int ECONNRESET
A network connection was closed for reasons outside the control of the
local host, such as by the remote machine rebooting or an unrecoverable
protocol violation.
Macro: int ENOBUFS
The kernel's buffers for I/O operations are all in use. In GNU, this
error is always synonymous with ENOMEM; you may get one or the
other from network operations.
The socket is not connected to anything. You get this error when you
try to transmit data over a socket, without first specifying a
destination for the data. For a connectionless socket (for datagram
protocols, such as UDP), you get EDESTADDRREQ instead.
Macro: int EDESTADDRREQ
No default destination address was set for the socket. You get this
error when you try to transmit data over a connectionless socket,
without first specifying a destination for the data with connect.
Macro: int ESHUTDOWN
The socket has already been shut down.
Macro: int ETOOMANYREFS
???
Macro: int ETIMEDOUT
A socket operation with a specified timeout received no response during
the timeout period.
Macro: int ECONNREFUSED
A remote host refused to allow the network connection (typically because
it is not running the requested service).
Macro: int ELOOP
Too many levels of symbolic links were encountered in looking up a file name.
This often indicates a cycle of symbolic links.
The remote host for a requested network connection is down.
Macro: int EHOSTUNREACH
The remote host for a requested network connection is not reachable.
Macro: int ENOTEMPTY
Directory not empty, where an empty directory was expected. Typically,
this error occurs when you are trying to delete a directory.
Macro: int EPROCLIM
This means that the per-user limit on new process would be exceeded by
an attempted fork. See section 22.2 Limiting Resource Usage, for details on
the RLIMIT_NPROC limit.
Macro: int EUSERS
The file quota system is confused because there are too many users.
Macro: int EDQUOT
The user's disk quota was exceeded.
Macro: int ESTALE
Stale NFS file handle. This indicates an internal confusion in the NFS
system which is due to file system rearrangements on the server host.
Repairing this condition usually requires unmounting and remounting
the NFS file system on the local host.
Macro: int EREMOTE
An attempt was made to NFS-mount a remote file system with a file name that
already specifies an NFS-mounted file.
(This is an error on some operating systems, but we expect it to work
properly on the GNU system, making this error code impossible.)
Macro: int EBADRPC
???
Macro: int ERPCMISMATCH
???
Macro: int EPROGUNAVAIL
???
Macro: int EPROGMISMATCH
???
Macro: int EPROCUNAVAIL
???
Macro: int ENOLCK
No locks available. This is used by the file locking facilities; see
13.15 File Locks. This error is never generated by the GNU system, but
it can result from an operation to an NFS server running another
operating system.
Macro: int EFTYPE
Inappropriate file type or format. The file was the wrong type for the
operation, or a data file had the wrong format.
On some systems chmod returns this error if you try to set the
sticky bit on a non-directory file; see section 14.9.7 Assigning File Permissions.
Macro: int EAUTH
???
Macro: int ENEEDAUTH
???
Macro: int ENOSYS
Function not implemented. This indicates that the function called is
not implemented at all, either in the C library itself or in the
operating system. When you get this error, you can be sure that this
particular function will always fail with ENOSYS unless you
install a new version of the C library or the operating system.
Macro: int ENOTSUP
Not supported. A function returns this error when certain parameter
values are valid, but the functionality they request is not available.
This can mean that the function does not implement a particular command
or option value or flag bit at all. For functions that operate on some
object given in a parameter, such as a file descriptor or a port, it
might instead mean that only that specific object (file
descriptor, port, etc.) is unable to support the other parameters given;
different file descriptors might support different ranges of parameter
values.
If the entire function is not available at all in the implementation,
it returns ENOSYS instead.
Macro: int EILSEQ
While decoding a multibyte character the function came along an invalid
or an incomplete sequence of bytes or the given wide character is invalid.
Macro: int EBACKGROUND
In the GNU system, servers supporting the term protocol return
this error for certain operations when the caller is not in the
foreground process group of the terminal. Users do not usually see this
error because functions such as read and write translate
it into a SIGTTIN or SIGTTOU signal. See section 27. Job Control,
for information on process groups and these signals.
Macro: int EDIED
In the GNU system, opening a file returns this error when the file is
translated by a program and the translator program dies while starting
up, before it has connected to the file.
Macro: int ED
The experienced user will know what is wrong.
Macro: int EGREGIOUS
You did what?
Macro: int EIEIO
Go home and have a glass of warm, dairy-fresh milk.
Macro: int EGRATUITOUS
This error code has no purpose.
Macro: int EBADMSG
Macro: int EIDRM
Macro: int EMULTIHOP
Macro: int ENODATA
Macro: int ENOLINK
Macro: int ENOMSG
Macro: int ENOSR
Macro: int ENOSTR
Macro: int EOVERFLOW
Macro: int EPROTO
Macro: int ETIME
The following error codes are defined by the Linux/i386 kernel.
They are not yet documented.
The library has functions and variables designed to make it easy for
your program to report informative error messages in the customary
format about the failure of a library call. The functions
strerror and perror give you the standard error message
for a given error code; the variable
program_invocation_short_name gives you convenient access to the
name of the program that encountered the error.
Function: char * strerror(int errnum)
The strerror function maps the error code (see section 2.1 Checking for Errors) specified by the errnum argument to a descriptive error
message string. The return value is a pointer to this string.
The value errnum normally comes from the variable errno.
You should not modify the string returned by strerror. Also, if
you make subsequent calls to strerror, the string might be
overwritten. (But it's guaranteed that no library function ever calls
strerror behind your back.)
The strerror_r function works like strerror but instead of
returning the error message in a statically allocated buffer shared by
all threads in the process, it returns a private copy for the
thread. This might be either some permanent global data or a message
string in the user supplied buffer starting at buf with the
length of n bytes.
At most n characters are written (including the NUL byte) so it is
up to the user to select the buffer large enough.
This function should always be used in multi-threaded programs since
there is no way to guarantee the string returned by strerror
really belongs to the last call of the current thread.
This function strerror_r is a GNU extension and it is declared in
`string.h'.
Function: void perror(const char *message)
This function prints an error message to the stream stderr;
see 12.2 Standard Streams. The orientation of stderr is not
changed.
If you call perror with a message that is either a null
pointer or an empty string, perror just prints the error message
corresponding to errno, adding a trailing newline.
If you supply a non-null message argument, then perror
prefixes its output with this string. It adds a colon and a space
character to separate the message from the error string corresponding
to errno.
The function perror is declared in `stdio.h'.
strerror and perror produce the exact same message for any
given error code; the precise text varies from system to system. On the
GNU system, the messages are fairly short; there are no multi-line
messages or embedded newlines. Each error message begins with a capital
letter and does not include any terminating punctuation.
Compatibility Note: The strerror function was introduced
in ISO C89. Many older C systems do not support this function yet.
Many programs that don't read input from the terminal are designed to
exit if any system call fails. By convention, the error message from
such a program should start with the program's name, sans directories.
You can find that name in the variable
program_invocation_short_name; the full file name is stored the
variable program_invocation_name.
Variable: char * program_invocation_name
This variable's value is the name that was used to invoke the program
running in the current process. It is the same as argv[0]. Note
that this is not necessarily a useful file name; often it contains no
directory names. See section 25.1 Program Arguments.
Variable: char * program_invocation_short_name
This variable's value is the name that was used to invoke the program
running in the current process, with directory names removed. (That is
to say, it is the same as program_invocation_name minus
everything up to the last slash, if any.)
The library initialization code sets up both of these variables before
calling main.
Portability Note: These two variables are GNU extensions. If
you want your program to work with non-GNU libraries, you must save the
value of argv[0] in main, and then strip off the directory
names yourself. We added these extensions to make it possible to write
self-contained error-reporting subroutines that require no explicit
cooperation from main.
Here is an example showing how to handle failure to open a file
correctly. The function open_sesame tries to open the named file
for reading and returns a stream if successful. The fopen
library function returns a null pointer if it couldn't open the file for
some reason. In that situation, open_sesame constructs an
appropriate error message using the strerror function, and
terminates the program. If we were going to make some other library
calls before passing the error code to strerror, we'd have to
save it in a local variable instead, because those other library
functions might overwrite errno in the meantime.
Using perror has the advantage that the function is portable and
available on all systems implementing ISO C. But often the text
perror generates is not what is wanted and there is no way to
extend or change what perror does. The GNU coding standard, for
instance, requires error messages to be preceded by the program name and
programs which read some input files should should provide information
about the input file name and the line number in case an error is
encountered while reading the file. For these occasions there are two
functions available which are widely used throughout the GNU project.
These functions are declared in `error.h'.
Function: void error(int status, int errnum, const char *format, ...)
The error function can be used to report general problems during
program execution. The format argument is a format string just
like those given to the printf family of functions. The
arguments required for the format can follow the format parameter.
Just like perror, error also can report an error code in
textual form. But unlike perror the error value is explicitly
passed to the function in the errnum parameter. This elimintates
the problem mentioned above that the error reporting function must be
called immediately after the function causing the error since otherwise
errno might have a different value.
The error prints first the program name. If the application
defined a global variable error_print_progname and points it to a
function this function will be called to print the program name.
Otherwise the string from the global variable program_name is
used. The program name is followed by a colon and a space which in turn
is followed by the output produced by the format string. If the
errnum parameter is non-zero the format string output is followed
by a colon and a space, followed by the error message for the error code
errnum. In any case is the output terminated with a newline.
The output is directed to the stderr stream. If the
stderr wasn't oriented before the call it will be narrow-oriented
afterwards.
The function will return unless the status parameter has a
non-zero value. In this case the function will call exit with
the status value for its parameter and therefore never return. If
error returns the global variable error_message_count is
incremented by one to keep track of the number of errors reported.
Function: void error_at_line(int status, int errnum, const char *fname, unsigned int lineno, const char *format, ...)
The error_at_line function is very similar to the error
function. The only difference are the additional parameters fname
and lineno. The handling of the other parameters is identical to
that of error except that between the program name and the string
generated by the format string additional text is inserted.
Directly following the program name a colon, followed by the file name
pointer to by fname, another colon, and a value of lineno is
printed.
This additional output of course is meant to be used to locate an error
in an input file (like a programming language source code file etc).
If the global variable error_one_per_line is set to a non-zero
value error_at_line will avoid printing consecutive messages for
the same file anem line. Repetition which are not directly following
each other are not caught.
Just like error this function only returned if status is
zero. Otherwise exit is called with the non-zero value. If
error returns the global variable error_message_count is
incremented by one to keep track of the number of errors reported.
As mentioned above the error and error_at_line functions
can be customized by defining a variable named
error_print_progname.
Variable: void (* error_print_progname) (void)
If the error_print_progname variable is defined to a non-zero
value the function pointed to is called by error or
error_at_line. It is expected to print the program name or do
something similarly useful.
The function is expected to be print to the stderr stream and
must be able to handle whatever orientation the stream has.
The variable is global and shared by all threads.
Variable: unsigned int error_message_count
The error_message_count variable is incremented whenever one of
the functions error or error_at_line returns. The
variable is global and shared by all threads.
Variable: int error_one_per_line
The error_one_per_line variable influences only
error_at_line. Normally the error_at_line function
creates output for every invocation. If error_one_per_line is
set to a non-zero value error_at_line keeps track of the last
file name and line number for which an error was reported and avoid
directly following messages for the same file and line. This variable
is global and shared by all threads.
A program which read some input file and reports errors in it could look
like this:
{
char *line = NULL;
size_t len = 0;
unsigned int lineno = 0;
error_message_count = 0;
while (! feof_unlocked (fp))
{
ssize_t n = getline (&line, &len, fp);
if (n <= 0)
/* End of file or error. */
break;
++lineno;
/* Process the line. */
...
if (Detect error in line)
error_at_line (0, errval, filename, lineno,
"some error text %s", some_variable);
}
if (error_message_count != 0)
error (EXIT_FAILURE, 0, "%u errors found", error_message_count);
}
error and error_at_line are clearly the functions of
choice and enable the programmer to write applications which follow the
GNU coding standard. The GNU libc additionally contains functions which
are used in BSD for the same purpose. These functions are declared in
`err.h'. It is generally advised to not use these functions. They
are included only for compatibility.
Function: void warn(const char *format, ...)
The warn function is roughly equivalent to a call like
error (0, errno, format, the parameters)
except that the global variables error respects and modifies
are not used.
Function: void vwarn(const char *format, va_list)
The vwarn function is just like warn except that the
parameters for the handling of the format string format are passed
in as an value of type va_list.
Function: void warnx(const char *format, ...)
The warnx function is roughly equivalent to a call like
error (0, 0, format, the parameters)
except that the global variables error respects and modifies
are not used. The difference to warn is that no error number
string is printed.
The vwarnx function is just like warnx except that the
parameters for the handling of the format string format are passed
in as an value of type va_list.
The errx function is roughly equivalent to a call like
error (status, 0, format, the parameters)
except that the global variables error respects and modifies
are not used and that the program is exited even if status
is zero. The difference to err is that no error number
string is printed.
The verrx function is just like errx except that the
parameters for the handling of the format string format are passed
in as an value of type va_list.